The washing and drying results are not satisfactory
There are streaks, whitish | The rinse aid quantity is too | Decrease the rinse aid quantity. |
stains, or a bluish layer on | high. |
|
glasses and dishes. |
|
|
|
|
|
Dry water drop stains on | The rinse aid quantity is too | Increase the rinse aid quantity. |
glasses and dishes. | low. |
|
|
|
|
| The detergent can be the | Use a different brand of |
| cause. | detergent. |
|
|
|
The dishes are wet. | The washing programme was | For better drying results, keep |
| without a drying phase or with | the door ajar for some minutes. |
| a decreased drying phase. |
|
|
|
|
The dishes are wet and matt. | The rinse aid dispenser is | Fill the rinse aid dispenser with |
| empty. | rinse aid. |
|
|
|
| The Multi tab function is on | Activate the rinse aid dispenser. |
| (this function automatically |
|
| deactivates the rinse aid |
|
| dispenser). |
|
|
|
|
Activating the rinse aid dispenser
1.Switch on the appliance. The appliance must be in setting mode.
2.Press and hold function button (B) and function button (C) simultaneously until the indicators of function buttons (A), (B) and (C) start to flash.
3.Release function button (B) and function button (C).
4.Press function button (B), the indicators of function buttons (A) and (C) go off while the indicator of function button (B) continues to flash. The display shows the current setting.
6.Switch off the appliance to confirm the operation.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
5.Press function button (B) again. The display shows the new setting.
26