John Lewis JLDW 1225 Delay start button, Programme buttons, Energy save button, Multi tab button

Page 8

Delay start button

Press this button to delay the start of the washing programme from 1 to 24 hours. Refer to 'Select and start a washing programme'.

Programme buttons

To select a washing programme, press one of these buttons until the display shows the programme number.

Energy save button

This function decreases the temperature in the drying phase. The power consumption is reduced by 25%.

Dishes can still be wet at the end of the programme when you open the appliance door. We recommend that you keep the door ajar and let the dishes dry.

Press this button to switch on the option. The related indicator comes on.

This function is available with all the washing programmes but has no impact on some programmes. Refer to ''Washing programmes''.

Multi tab button

Allows the use of combi detergent tablets (e.g. 3 in 1, 4 in 1, 5 in 1). Refer to ''Multi tab function''.

Reset button

Press this button to cancel a washing programme in progress.

Indicators

Salt 1)

The indicator comes on when the

 

salt has run out.

 

The salt indicator can remain on

 

for a few hours after that salt has

 

been replenished (assuming the

 

appliance remains switched on).

 

The operation of the appliance is

 

not affected.

 

 

Rinse aid

The indicator comes on when the

1)

rinse aid has run out.

 

 

End

The indicator comes on when the

 

washing programme ends.

 

 

1)The salt and rinse aid indicators are never on while a washing programme is running even if filling with salt and/or rinse aid is necessary.

Function buttons

The following operations can be done with these buttons:

•The electronic setting of the water softener.

•The cancellation of a washing programme in progress.

•The activation or deactivation of the rinse aid dispenser (only with the Multi tab function activated).

•Activation or deactivation of the acoustic signals.

Setting mode

The appliance must be in setting mode for these operations:

•To start a washing programme.

•To start a delay start.

•To adjust electronically the level of the water softener.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents
Jldw Dishwasher Important safety information InstallationChild safety General safetyMaintenance and cleaning Service Correct use Ecological hints Environmental informationContents Visual signal Description of the applianceControl panel On/off buttonDisplay Display showsDelay start button Reset buttonIndicators Setting modeWashing programmes Acoustic signalsDeactivating the acoustic signals Consumption values When the appliance is first installed Water softenerSetting manually Setting electronicallyFilling with salt Filling with rinse aidLoading cutlery and dishes Adjusting the rinse aid dosageDaily use Lower basket XXLCutlery basket Upper basket Page Adjusting the height of the upper basket Use of detergentMoving the upper basket to the higher position Moving back the upper basket to the lower positionMulti tab function Fill with detergentStarting the washing programme without delay start Starting the washing programme with delay startCancelling the delay start Select and start a washing programmeInterrupting a washing programme in progress Cancelling the washing programmeUnloading the appliance Maintenance and cleaning Cleaning the filtersCleaning the appliance Frost precautionsProlonged periods of non-operation Moving the applianceWith some malfunctions, the display shows an alarm code Something not workingWashing and drying results are not satisfactory Activating the rinse aid dispenser Release function button B and function button CTechnical data InstallationUnpacking Fitting under the kitchen worktopLevelling of the appliance Removing the appliance worktopWater drain connection Water connectionWater inlet connection Page Electrical connection Spare parts Repairs after sales serviceMade even if the appliance is under guarantee Page Page Page 117938510-E-152011 Subject to change without notice
Top Page Image Contents