Indesit BAAN 10 manual Installation, Positioning and connection, Levelling, Electrical connections

Page 2

Installation

 

! Before placing your new appliance into operation please

GB

read these operating instructions carefully. They contain

 

important information for safe use, for installation and for

 

 

care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the rear feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

12

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operating Instructions REFRIGERATOR/FREEZER CombinationPositioning InstallationPositioning and connection LevellingReversible doors MULTI-USE * bin Description of the applianceOverall view FreezerStarting the appliance Setting the temperatureStart-up and use Chiller systemUsing the refrigerator to its full potential Using the freezer to its full potential Cleaning the appliance Maintenance and careSwitching the appliance off Avoiding mould and unpleasant odoursDisposal Precautions and tipsGeneral safety Respecting and conserving the environmentTroubleshooting Malfunctions Possible causes / SolutionsModel AssistanceCommunicating 195049115.00

BAAN 10 specifications

The Indesit BAAN 10 is a modern washing machine designed for efficiency, convenience, and user-friendly operation. With its sleek design and advanced features, it stands out as a reliable appliance for households of various sizes.

One of the primary characteristics of the BAAN 10 is its capacity. With a wash load capacity of up to 7 kg, this machine is perfectly suited for families or individuals with larger laundry needs. The drum is designed to handle a range of fabric types and weights, ensuring that everything from delicate garments to bulky bed linens is washed gently yet effectively.

The BAAN 10 is equipped with a range of washing programs, allowing users to select the most appropriate cycle for their laundry. These programs include options for cotton, synthetic, and delicate fabrics, as well as specialized cycles for sportswear and wool. This versatility ensures that users can care for their clothes appropriately without risking damage to the fabric.

Energy efficiency is a significant feature of the Indesit BAAN 10. It boasts an impressive energy rating that helps reduce electricity consumption, making it an eco-friendly choice for households striving to lower their environmental impact. Additionally, the machine's water-saving technology optimizes every wash cycle, conserving both water and energy.

One of the standout technologies in the BAAN 10 is its innovative Fast Wash function. This feature allows users to complete shorter wash cycles without compromising on cleanliness. It is particularly beneficial for those with busy lifestyles or when time is of the essence.

Another notable aspect is the machine’s user interface, which is designed for simplicity and ease of use. The intuitive control panel features a clear display and well-placed buttons, allowing users to set their preferred settings quickly and efficiently. The delay start option is particularly handy, enabling users to schedule their washing to fit their daily routines.

Furthermore, the Indesit BAAN 10 includes a child lock feature, providing peace of mind for those with young children at home. This safety mechanism prevents accidental settings changes during operation.

Durability is also a hallmark of this washing machine. Built with high-quality materials, the BAAN 10 is designed to withstand the rigors of daily laundry while maintaining consistent performance over time. Overall, the Indesit BAAN 10 combines practicality, efficiency, and technology, making it an excellent choice for anyone in need of a dependable washing solution.
Top Page Image Contents