hussman FMSS-L operation manual Refrigeration Contd

Page 10

IGSS-FMSS-L-0708

Refrigeration (Cont'd)

Thermostatic Expansion Valve Location

This device is located on the same side as the refrigeration stub. An Alco balanced port expansion valve model is furnished as standard equipment, unless otherwise specified by customer.

Expansion Valve Adjustment

Expansion valves must be adjusted to fully feed the evaporator. Before attempting any adjustments, make sure the evaporator is either clear or very lightly covered with frost, and that the fixture is within 10°F of its expected operating temperature.

Measuring the Operating Superheat

1.Determine the suction pressure with an accurate pressure gauge at the evaporator outlet.

2.From a refrigerant pressure temperature chart, determine the saturation temperature at the observed suction pressure.

3.Measure the temperature of the suction gas at the thermostatic remote bulb location.

4.Subtract the saturation temperature obtained in step No. 2 from the temperature measured in step No. 3.

5.The difference is superheat.

6.Set the superheat for 5°F - 7°F.

T-STAT Location

Thermostats are located within the electrical raceway. The raceway location is dependent on the style of the front panel and whether the case is going to be pushed up against a wall.

Front of Case

Ballast Location

Ballast and T-stat are located in the front right hand area of the case, viewed from customer angle.

In all cases, the thermostat is located on the same side of the case. If you are looking at the case from the front, it is the right-hand side. If you are looking at the case from the back, it is the left-hand side.

It is the contractor’s responsibility to install case(s) according to local construction and health codes.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Case-front Self Service RevTable of Contents General InstructionsInstallation Cut and Plan ViewsInstallation Contd Joint TrimBumper Installation Instructions Boston Series Helpful HintsBoston 2000 Eco Series Boston 1000 Series Installation Plumbing RefrigerationRefrigeration Contd Electrical User InformationUser Information Contd Maintenance Keep your Food Equipment Clean Electrical Wiring DiagramsLow / Medium Temp Wiring Diagrams 208 V 240 L1 5.7 L2 4.8Power ~208/240 VAC 1Ø 50/60Hz. 4W 115 208 240115 V 208 240 Power ~208/240 VAC 1Ø 50/60Hz10.0 115 Contd11.3 13.3 115 V 208 240 14.1 WiringL3 ~ Wiring Diagrams Contd 208 V 240 L1 11.4 L2 9.6W1400005 RevAppendices Appendix A. Temperature GuidelinesAppendix B. Application Recommendations Appendices Contd Appendix D. Recommendations to UserAppendices Contd Service Record
Related manuals
Manual 20 pages 3.11 Kb

FMSS-L specifications

The Hussman FMSS-L is a state-of-the-art commercial refrigeration display case, specifically designed to meet the needs of grocery stores, convenience retailers, and foodservice establishments. Known for its advanced features and innovative technologies, the FMSS-L provides an ideal solution for merchandising fresh food products while ensuring optimal temperature control and energy efficiency.

One of the main features of the FMSS-L is its impressive visibility. Engineered with a low front profile and curved glass design, this model maximizes product exposure, enticing customers and enhancing the shopping experience. The spacious interior layout allows for ample product display, taking full advantage of the vertical space available in retail environments.

The FMSS-L incorporates advanced refrigeration technology, ensuring that food items are kept at safe temperatures while minimizing energy consumption. Its well-insulated case construction is designed for enhanced energy efficiency and durability. This is complemented by smart refrigeration controls and variable-speed fans, which adjust airflow based on cooling requirements, further optimizing energy use.

Hussman's commitment to energy efficiency is evident in the use of eco-friendly refrigerants. The FMSS-L is designed to comply with the latest environmental regulations, ensuring that businesses can operate sustainably without sacrificing performance. Additionally, energy-efficient LED lighting enhances product visibility while using significantly less energy than traditional lighting options.

Other notable characteristics of the FMSS-L include adjustable shelving, which allows retailers to customize the display according to their specific needs. The shelves can be easily repositioned to accommodate various product sizes and shapes, promoting flexibility in merchandising. Furthermore, the case is equipped with a self-closing glass door system that provides easy access while also reducing energy loss.

Maintenance is straightforward with the FMSS-L, thanks to its accessible components and user-friendly design. Hussman prioritizes serviceability, allowing for prompt repairs and reduced downtime, which are critical for busy retail environments.

Overall, the Hussman FMSS-L is a well-engineered refrigeration solution that combines aesthetic appeal, advanced technology, and energy efficiency, making it an excellent choice for retailers looking to showcase fresh food products effectively while maintaining operational sustainability. With its blend of innovative features and practicality, the FMSS-L stands out as a reliable partner in the competitive retail food landscape.
Top Page Image Contents