hussman FMSS-L operation manual General Instructions, Table of Contents

IGSS-FMSS-L-0508

General Instructions

Table of Contents
General Instructions	2
Cut and Plan Views	3
Installation	3
Location	3
Uncrating the Stand	3
Exterior Loading	3
Setting and Joining	3
Leveling	3
Joint Trim	4
Plumbing	5
Waste Outlet and P-TRAP	5
Installing Condensate Drain	5
Refrigeration	5
Refrigerant Type	5
Refrigeration Lines	5
Control Settings - Remote	5
Control Settings - Self Contained	5
Access to TX Valves and Drain Lines	5
Electronic Expansion Valve (Optional)	5
Thermostatic Expansion Valve Location	6
Measuring the Operating Superheat	6
T-STAT Location	6
Ballast Location	6
Electrical	7
Wiring Color Code	7
Electrical Circuit Identification	7
Electrical Service Receptacles (When Applicable)	7
Field Wiring and Serial Plate Amperage	7
Ballast Location	7
User Information	7
Stocking	7
Important Steps	8
Case Cleaning	8
Cleaning Glass and Mirrors	8
Plexiglass and Acrylic Care	8
Cleaning	8
Antistatic Coatings	8
Maintenance	9
Replacing Fluorescent Lamps	9
Evaporator Fans	9
Copper Coils	9
Tips and Troubleshooting	9
Electrical Wiring Diagrams	9
Wiring Diagrams	10
Appendices	17
Appendix A. - Temperature Guidelines	17
Appendix B. - Application Recommendations	17
Appendix C. - Field Recommendations	17
Appendix D. - Recommendations to User	18

This Booklet Contains Information on:

FMSS-L, FMSS-L-L-Remote

The FMSS-L, FMSS-L-L is a single-deck, refrigerated, self-service merchandiser, which offers additional related display when positioned in front of a “Parent” service case. The FMSS-L, FMSS-L-L only fits under Hussmann Chino Style cases.

Shipping Damage

All equipment should be thoroughly examined for shipping damage before and during unloading.

This equipment has been carefully inspected at our factory and the carrier has assumed responsibility for safe arrival. If damaged, either apparent or concealed, claim must be made to the carrier.

Apparent Loss or Damage

If there is an obvious loss or damage, it must be noted on the freight bill or express receipt and signed by the carrier’s agent; otherwise, carrier may refuse claim. The carrier will supply necessary claim forms.

Concealed Loss or Damage

When loss or damage is not apparent until after equipment is uncrated, a claim for concealed damage is made. Make request in writing to carrier for inspection within 15 days, and retain all packaging. The carrier will supply inspection report and required claim forms.

Shortages

Check your shipment for any possible shortages of material. If a shortage should exist and is found to be the responsibility of Hussmann Chino, notify Hussmann Chino. If such a shortage involves the carrier, notify the carrier immediately, and request an inspection. Hussmann Chino will acknowledge shortages within ten days from receipt of equipment.

Hussmann Chino Product Control

The serial number and shipping date of all equipment has been recorded in Hussmann’s files for warranty and replacement part purposes. All correspondence pertaining to warranty or parts ordering must include the serial number of each piece of equipment involved, in order to provide the customer with the correct parts.

Keep this booklet with the case at all times for future reference.

/CHINO

A publication of HUSSMANN® Chino

13770 Ramona Avenue • Chino, California 91710

(909)628-8942 FAX

(909)590-4910

(800)395-9229



This equipment is to be installed to comply with the applicable NEC, Federal, State,and Local Plumbing and Construction Code ha ving jurisdiction.