IKEA FCF186/44 manual What to do if…, Floor, Set a higher temperature, Ates continually Rectly

ENGLISH 11

What to do if…

Caution! Before troubleshooting, disconnect the power supply.

Only a qualified electrician or competent person must do the troubleshooting that is not in this manual.

Important! There are some sounds during normal use (compressor, refrigerant circulation).

Problem		Possible cause	Solution
The appliance is noisy.		The appliance is not suppor-	Check if the appliance stands
		ted properly.	stable (all the feet should be on
			the floor).
The appliance does not		The appliance is switched off.	Switch on the appliance.
operate. The lamp does
not operate.
		The plug is not connected to	Connect the plug to the mains
		the mains socket correctly.	socket correctly.
		The appliance has no power.	Connect a different electrical
		There is no voltage in the	appliance to the mains socket.
		mains socket.	Contact a qualified electrician.
The lamp does not work.		The lamp is defective.	Refer to "Replacing the lamp".
The compressor	oper-	The temperature is not set cor-	Set a higher temperature.
ates continually.		rectly.
		The door is not closed correct-	Refer to "Closing the door".
		ly.
		The door has been opened	Do not keep the door open lon-
		too frequently.	ger than necessary.
		The product temperature is	Let the product temperature
		too high.	decrease to room temperature
			before storage.
		The room temperature is too	Decrease the room tempera-
		high.	ture.
Water flows on the rear		During the automatic defrost-	This is correct.
plate of the refrigerator.		ing process, frost defrosts on
		the rear plate.
Water flows into the re-		The water outlet is clogged.	Clean the water outlet.
frigerator.
		Products prevent that water	Make sure that products do not
		flows into the water collector.	touch the rear plate.
Water flows on	the	The melting water outlet does	Attach the melting water outlet
ground.		not flow in the evaporative	to the evaporative tray.
		tray above the compressor.