Margaritaville MD 3000 Series instruction manual Setting UP Mixed Drink Maker

Page 6

SETTING UP THE

MIXED DRINK MAKER

Tip: Before starting, it’s best to chill the liquor AND juice tanks in the refrigerator.

1.Place the Mixed Drink Maker on a clean, dry, flat surface.

2.Load the liquor and juice tanks (each tank will sit flat on surface. Recommended to use chilled juice).

a.Fill the white cap liquor tank with rum, vodka or tequila.

b.Fill the red cap juice tank with cranberry juice only.

c.Fill the green cap juice tank with sour mix only.

d.Fill the orange cap juice tank with orange juice only (no pulp).

e.Load all of the tanks in their color-coded designated areas. (Each tank only fits one way, lining up with the unique grooves on the appropriate tank.)

f.Never put anything but the chosen liquor and juices into the corresponding tanks.

3.Turn on the power. (The switch is located at the rear side of the machine.) The welcome screen will appear within 7 seconds.

4.Select your liquor by turning the Drink Wheel. The chosen liquor will be in the center position.

5.Next, confirm that your juices are in place by pressing the center button.

6.Press the center button to confirm.

7.That’s it. You’re good to go—bring on the guests.

-3-

Image 6
Contents Mixed Drink Maker Important Safeguards Install your pre-chilled tanks Quick Steps to GET Your Party StartedL C O M E Mixed Drink MakerControl Panel Setting UP Mixed Drink Maker Serving Mixed Drinks Vodka Drinks RecipesTequila Drinks Rum Drinks Refilling the Mixed Drink Maker To refill the liquor tankCleaning and Maintenance Replacement Parts Don’ts Page Do not Return this Product to the Place of Purchase