Master Bilt IM-23GB manual General Instructions

Page 5

NOTICE

Read this manual before installing, cleaning, or performing any maintenance on your cabinet. Keep the manual and refer to it before doing any service on the equipment. Failure to do so could result in personal injury or damage to the cabinet.

DANGER

Improper or faulty hook-up of electrical components on the refrigeration units can result in severe injury or death. All electrical wiring hook-ups must be done in accordance with all applicable local, regional or national standards.

NOTICE

Installation and service of the refrigeration and electrical components of the cabinet must be performed by a refrigeration mechanic and/or a licensed electrician.

The portions of this manual covering refrigeration and electrical components contain technical instructions intended only for persons qualified to perform refrigeration and electrical work. This manual cannot cover every installation, use or service situation. If you need additional information, call or write us:

Customer Service Department

Master-Bilt Products

Highway 15 North

New Albany, MS 38652

Phone (800) 684-8988

Fax (800) 684-8988

GENERAL INSTRUCTIONS

1.Be sure the ice merchandiser is properly installed by competent service people.

2.Keep the ice merchandiser clean and sanitary so it will meet your local sanitation codes. Clean the unit with a mild detergent and water, then rinse.

3.Rotate your stock so that older stock does not accumulate.

4.Do not place product in the ice merchandiser when it is soft or partially thawed. Also, product should not be put in the ice merchandiser for at least 6 hours after it is started.

5.Stock ice merchandiser as quickly as possible, exposing only small quantities to condition temperatures for short periods of time.

NOTICE TO STORE OWNERS / MANAGERS

Moisture or liquid around or under the cabinet is a potential slip/fall hazard for persons walking by or working in the general area of the cabinet. Any cabinet malfunction or housekeeping problem that creates a slip/fall hazard around or under the cabinet should be corrected immediately.

If moisture or liquid is observed around or under a Master-BiltIce Merchandiser, an immediate investigation should be made by qualified personnel to determine the source of the moisture or liquid. The investigation should determine if the ice merchandiser is malfunctioning or if there is a drainpipe leaking.

5

Image 5
Contents IM-23GB Page Table of Contents Store Conditions IntroductionGeneral Instructions MASTER-BILT Electronic Refrigeration Control TLY-25 MechanicalElectrical General Description11 12 13 7 MICROPROCESSOR-BASED Digital Electronic Freezer ControllerOperation HOW to Change SET PointsList of Parameters Alarm SignalsOther Signals Electrical Connections Service InstructionsCheck List Trouble ShootingICE Merchandiser Monthly Checklist Cabinet Cleaning ProceduresPart Description Parts ListOwner Responsibility Sale and Disposal