Multiquip MVH-402GHB Smoothly, Starting section of this manual, Flow of fuel, Mixture

Page 15

MVH-402GHB — ENGINE COMPONENTS

Figure 4. MVH-402GHB Engine Components

INITIAL SERVICING

The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing.

1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

WARNING

Adding fuel to the tank should be accomplished only when the engine is stopped and has had an

opportunity to cool down. In the event of a fuel spill, DO NOT attempt to start the engine until the

fuel residue has been completely wiped up, and the area surrounding the engine is dry.

2.

Throttle Lever – Used to adjust engine RPM speed (lever

 

advanced forward SLOW, lever back toward operator

 

FAST).

3.

Recoil Starter (pull rope) – Manual-starting method. Pull

 

the starter grip until resistance is felt, then pull briskly and

 

smoothly.

4.

Starter Grip – Grip this handle to start engine.See engine

 

starting section of this manual.

5.

Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop

 

the flow of fuel.

6.

Choke Lever – Used in the starting of a cold engine, or in

 

cold weather conditions. The choke enriches the fuel

 

mixture.

7. Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

Operating the engine without an air

NOTEfilter, with a damaged air filter, or a filter in need of replacement will

allow dirt to enter the engine, causing rapid engine wear.

8. Spark Plug – Provides spark to the ignition system. Set spark plug gap (HONDA) to 0.6 - 0.7 mm (0.028 - 0.031 inch). Clean spark plug once a week.

9. Muffler – Used to reduce noise and emissions. Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER operate the engine with the muffler removed.

WARNING

Engine components can generate extreme heat. To prevent burns, DO

NOT touch these areas while the engine is running or immediately after

operating. NEVER operate the engine with the muffler removed.

10. Fuel Tank – Holds unleaded gasoline. For additional information refer to engine owner's manual.

MQ-MIKASA MVH-402GHB PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (12/17/03) — PAGE 15

Image 15
Contents MVH-402GHB Page Heres HOW to GET Help Table of Contents Parts Ordering Procedures MVH-402GHB Reversible Plate Compactor Specifications MVH-402GHB SpecificationsMVH-402GHB Dimensions Seriously injured if you do not follow directions MVH-402GHB Safety Message Alert SymbolsAlways wear approved respiratory protection Always wear approved eye and hearing protectionThis reversible plate compactor MVH-402GHB Rules for Safe Operation Always know the location of the nearest first aid kit Loading and Unloading CraneNever lift the machine while the engine is running TransportingMVH-402GHB Operation and Safety Decals Frequency/Speed Plate CompactorVibratory Plates ReversibleVibratory PlatesMVH-402GHB Plate Compactor Components Mixture SmoothlyStarting section of this manual Flow of fuelChecking The Fuel MVH-402GHB PRE-INSPECTIONBefore Starting Checking Engine Oil LevelThrottle Lever Start Adjusting Handle HeightPlace the engine ON/OFF switch in the on position MVH-402GHB OperationTraveling Turn the engine ON/OFF switch to the OFF position Figure StoppingStowing the Handle Check for leakage of fuel or oil MVH-402GHB MaintenanceInspection and Maintenance Service Tables Daily ServiceRemove and clean the spark plug Figure Spark PlugAir Filter Replacing Clutch Reinstalling the V-beltChecking and Replacing the V-Belt and Clutch Checking ClutchBattery Maitenance Battery Cable ConnectionReplacing Hydraulic Oil Engine Troubleshooting MVH-402GHB -TROUBLESHOOTINGMVH-402GHB -TROUBLESHOOTING Troubleshooting Compactor Page Items Found In the Items Number Column Items Found In the Remarks ColumnDescription Suggested Spare PartsMVH-402GHB Decal Placement Part Name QTY. Remarks MVH-402GHB -VIBRATING Plate Assy Part Name QTY MVH-402GHB Base and Engine Assy BOLT, Socket Head 10x90 T BOLT, Socket Head 10x80 TMVH-402GHB -VIBRATOR Assy Vibrating Case MVH-402GHB -VIBRATOR Assy Stop Ring S-10 MVH-402GHB Hydraulic System Assy Elbow PT1/4- PF3/8 1034 Breather JointMVH-402GHB Control Handle Assy Part Name MVH-402GHB Control Assy Part Name QTY Remarks MVH-402GHB Battery Assy MVH-402GHB Battery Assy Honda GX390K1SMX2 Engine AIR Cleaner Assy GASKET, Elbow Honda GX390K1SMX2 Engine Camshaft Assy ROD, Push Honda GX390K1SMX2 Engine Carburetor Assy 106015ZE8005 Honda GX390K1SMX2 Engine Carburetor AssyHonda GX390K1SMX2 Engine Control Assy ARM, Governor Honda GX390K1SMX2 Engine Crankcase Cover Assy PACKING, Case Cover Honda GX390K1SMX2 Engine Crankshaft Assy CRANKSHAFT, Q-TYPE Honda GX390K1SMX2 Engine Cylinder Barrel Assy Switch ASSY.,OIL Level Honda GX390K1SMX2 Engine Cylinder Head Assy GUIDE, Valve OS Optional Honda GX390K1SMX2 Engine FAN Cover Assy CLIP, Tube Honda GX390K1SMX2 Engine Flywheel Assy FAN, Cooling Honda GX390K1SMX2 Engine Fueltank Assy TUBE, Fuel 4.5X3000 Honda GX390K1SMX2 Engine Ignition Coil Assy Coil ASSY., Ignition Honda GX390K1SMX2 Engine Muffler Assy Muffler 100DB Honda GX390K1SMX2 Engine Piston Assy Ring SET, Piston STD Honda GX390K1SMX2 Engine Recoil Starter Assy PULLEY, Recoil Starter Labels Assy Emblem Terms and Conditions of Sale Parts Page Technicalassistance

MVH-402GHB specifications

The Multiquip MVH-402GHB is a state-of-the-art vibratory plate compactor designed for optimal performance in various compaction applications. Known for its robust build and high efficiency, this piece of equipment is ideal for landscaping, road construction, and site preparation tasks. The MVH-402GHB is engineered to deliver outstanding results, making it a reliable choice for both contractors and DIY enthusiasts.

One of the standout features of the MVH-402GHB is its powerful Honda engine. This reliable 4-stroke engine delivers excellent performance while ensuring low fuel consumption and reduced emissions. The efficient engine allows for prolonged operation without frequent refueling, which is a significant advantage on larger job sites.

In terms of performance, the MVH-402GHB boasts a compaction force of up to 4,500 pounds, making it capable of compacting various materials including soils, gravel, and asphalt. Its operating weight of around 220 pounds provides balance and stability during operation, allowing for efficient maneuverability even in tighter spaces. The unit can reach a travel speed of approximately 80 feet per minute, enabling operators to cover larger areas more effectively.

The MVH-402GHB features advanced technology that enhances its usability. The integrated water tank allows for better dust control and cooling of the plate, ensuring that the surface remains moist for optimal compaction without damaging the material. Additionally, the compactor's ergonomic design includes a foldable handle, making it easy to transport and store. This focus on user-friendliness is complemented by a vibration-dampening design, which minimizes operator fatigue during extended use.

The construction of the Multiquip MVH-402GHB emphasizes durability and longevity. It is built with heavy-gauge steel and features a reinforced frame, ensuring it can withstand the rigors of daily use. The base plate is designed for maximum contact with the surface, further enhancing compaction efficiency.

In summary, the Multiquip MVH-402GHB is a top-tier vibratory plate compactor that combines power, efficiency, and user comfort. Its Honda engine, impressive compaction force, and thoughtful design features make it an essential tool for professionals and enthusiasts alike. Whether you are working on a small landscaping project or a larger construction site, the MVH-402GHB delivers reliable and high-quality compaction results.