Avocent manual Emerge HGA51G-DIR30 Antenna

Page 1

The following will help you install your directional antenna easily. Should you require further assistance, please contact Avocent Technical Support.

Quick Installation Guide

EmergeHGA51G-DIR30

High Gain 5.1 GHz Directional Antenna

Emerge HGA51G-DIR30 Antenna

Shown with EWMS1000 Extender

Extended Range Operation

The HGA51G-DIR30 directional antenna is an accessory for Emerge wireless extenders, which are factory-equipped with omni- directional antennas. Directional antennas provide extended range operation by focusing the energy of radio waves into an intensified directional beam. Extended distance operation requires installation of at least one directional antenna onto a transmitter and one onto a receiver. Installation of two antennas per unit will guard against signal blockage but will not increase transmission distance.

Omni-

 

 

 

 

 

 

 

Directional

directional

 

 

 

 

 

 

 

Antenna

Antenna

 

 

 

 

 

 

 

 

Antenna Head

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(curved face shown)

 

 

Knuckle Joint

 

 

 

 

 

 

Antenna Shaft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connector Arm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Knurled Fastener

 

 

 

 

 

 

 

 

 

If your wireless extenders are not already properly placed and connected to audio, video, power and control sources, then please refer the appropriate product documentation before proceeding with the instructions provided in this document.

1Facing the product, remove the omni- directional antenna from the left-hand antenna jack on both the transmitter and receiver.

The antennas loosen from the antenna jack by turning the knurled fastener in a counter- clockwise manner.

2Select either directional antenna and extend the assembly such that its connector

arm and antenna shaft are parallel with each other at the knuckle joint.

3Engage the center socket of the antenna connector arm onto the center pin of the transmitter antenna jack. Turn the knurled fastener clockwise until finger tight to secure the antenna.

4If the transmitter is to be shelf or rack mounted, raise the antenna head such that the antenna shaft is pointed upward and perpendicular to the connector arm at the knuckle joint. This motion requires proper alignment of the knuckle joint, which can be accomplished by rotating the antenna shaft. Once vertical, swivel the curved antenna face toward the intended receiver.

5If the transmitter is to be wall-mounted, allow sufficient clearance for the curved antenna face to swivel freely in all directions.

6Repeat steps 2 through 5 for the receiver. For best results, position the wireless extenders so they are on the same horizontal plane.

7Using the signal strength LEDs for guidance, swivel the curved face of transmitter antenna head toward the directional antenna on the receiver.

8Using the signal strength LEDs for guidance, swivel the curved face of receiver antenna head toward the directional antenna on the transmitter.

To Contact Avocent Technical Support:

CALL (888) 793-8763 USA or 353-61-715292 Shannon, IR

VISIT www.avocent.com

Avocent, the Avocent logo, and Emerge are trademarks or registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2007 Avocent Corporation. All rights reserved.

590-626-501C

Image 1
Contents Emerge HGA51G-DIR30 Antenna Emerge HGA51G-DIR30Call 888 793-8763 USA or 353-61-715292 Shannon, IR Shown with EWMS1000 Extender Extended Range OperationAdditional Information Emerge HGA51G-DIR30 Directional AntennaShown with EWMS1000 Extender

HGA51G-DIR30 specifications

The Avocent HGA51G-DIR30 is a cutting-edge device designed to streamline the management of data center operations, combining advanced features, technologies, and characteristics that address the demands of modern IT environments. This model is recognized for its robust capabilities in enhancing remote accessibility, efficiency, and security.

One of the most notable features of the HGA51G-DIR30 is its high-performance KVM (Keyboard, Video, Mouse) over IP technology. This allows IT administrators to access and control servers remotely, regardless of their geographical location. With support for various video resolutions, including high-definition outputs, users can experience seamless interactions as if they were physically in front of the server.

The device boasts a user-friendly interface that integrates with existing IT infrastructure, making it easy for teams to deploy and manage. It supports multiple protocols, enabling compatibility with a wide range of devices and systems, which ensures a flexible and scalable solution for diverse environments.

Another significant characteristic of the Avocent HGA51G-DIR30 is its focus on security. The device includes advanced features such as encrypted communications and secure user authentication, which protect sensitive data and prevent unauthorized access. This is particularly crucial in environments where compliance with regulatory standards is paramount.

Efficiency is further enhanced through built-in management tools that allow for monitoring and diagnostics. Administrators can track usage patterns, identify potential issues before they escalate, and make informed decisions about resource allocation and optimization. This proactive approach helps maintain uptime and ensures that critical applications remain operational.

In terms of connectivity, the HGA51G-DIR30 supports multiple users accessing various servers simultaneously, making it ideal for collaborative environments. Its modular design also allows for easy integration with additional devices, facilitating growth and adjustments in a rapidly changing technological landscape.

In summary, the Avocent HGA51G-DIR30 is a sophisticated KVM over IP solution that encompasses a myriad of features aimed at enhancing remote management, security, and operational efficiency in data centers. Its combination of advanced technologies and user-friendly design positions it as an essential tool for IT professionals looking to elevate their data center management capabilities.