ENGLISH
Assembly of Base Support
1.Attach Push Handle (E) from inside Storage Compartment (C) using supplied #1 Screws.
2.Insert Cross Bar (K) into the square inserts on the inside of Base Support (I) and secure from above with two #2 Bolts. Insert the Leg Assembly (L) over the protruding ends of the Base Support (I) and fasten from the inside of Base Support (I) using four #4 Bolts, four #5 Flat Washers, and four #6 Nut Caps.
3.Secure Bottom Plate (J) to Base Support (I) using four #2 Bolts.
4.Assemble Base Support (I) into the bottom of the Storage Compartment (C) and secure with four #3 Bolts.
7