Norcold 120x installation manual Connect the water supply line

Page 7

Connect the Ice Maker (optional)

 

Connect the Electrical Components

The ice maker is assembled to the refrigerators at the factory as optional equipment. If the refrigerator does not have a factory installed ice maker, one can not be added to the refrigerator at a later time.

The refrigerator installer must connect a cold water supply line to the solenoid valve at the rear of the refrigerator. The following are necessary to connect the icemaker:

-1/4 in. OD copper tubing for the water supply line.

OR

-1/4 in. OD plastic tubing for the water supply line.

-1/4 in. shut off valve in the water supply line. This should be easily accessible through the lower intake vent.

Connect the water supply line:

Install a 1/4 in. OD water supply line [1] from the water shut off valve of the vehicle to the solenoid water valve [2] at the rear of the refrigerator (See Art01014):

NOTE: A brass compression nut [1], a brass sleeve, a plastic sleeve [2] , and a brass insert [3] are supplied and attached to the rear of the refrigerator (See Art01604).

-Put the compression nut and then the sleeve onto the water supply line [4].

-For copper tubing, use the brass sleeve.

-For plastic tubing, use the plastic sleeve [2].

-For plastic tubing with .040 in. wall thickness, also use the brass insert [3].

-Flush the water supply line until the water is clear.

-Put the tubing into the adapter [5] until it is against the stop of the adapter.

-Tighten the compression nut by hand (hard finger tight).

-Using two wrenches, tighten the compression nut 1 ½ to 2 turns.

-Open the water shut off valve of the vehicle.

-Examine the connections for leaks.

AC Operation

120 volts AC voltage

 

(132 volts max. - 108 volts min.)

 

12 volts DC control voltage

 

(15.4 volts max. - 10.5 volts min.)

This refrigerator operates on these electrical sources. Opera- tion out of these limits may damage the refrigerator’s electrical circuit parts and will void the warranty.

Connect the 120 volts AC supply:

WARNING: Connect the AC power cord(s) only to a grounded three-prong receptacle. Do not remove the round ground prong from the AC power cord of the refrigerator or the ice maker (optional). Do not use a two prong adapter or an extension cord with either AC power cord. Operation of the refrigerator without correct ground can cause dangerous electrical shock or death if you are touching the metal parts of the refrigerator.

Put the AC power cord(s) into a grounded three-prong recep- tacle:

-Make sure the receptacle is positioned within easy reach of the lower intake vent.

-Make sure the power cord(s) does not touch the burner cover, the flue pipe, or any hot component that could damage the insulation of the power cord.

Connect the 12 volts DC supply:

The refrigerator controls operate on 12 VDC power. As the distance from the vehicle battery to the refrigerator increases, the correct AWG wire size and fuse size also increases. If the wire size is too small for the distance, a voltage drop occurs.

Use a minimum of 18 AWG wire and a maximum 6 Amp fuse. If the wire size is larger than the min. size, use the correct fuse per RVIA A119.2 standard or local codes.

1.Install a fuse in DC power supply wires between the battery and the refrigerator:

-Put fuse as close to the battery as possible.

2.Connect the DC power supply wires (See Art00966):

-Attach a 1/4 inch Quick Connect terminal to each DC power supply wire.

Installation Manual 7

Image 7
Contents Installation Manual Certification and Code Requirements Table of ContentsSafety Awareness Safety InstructionsAssemble the Enclosure for the Refrigerator Ventilation RequirementsCertified Vent RO Height Install the Lower and Upper VentsInstallation Manual Install Decorative Door Panels Connect the water supply line Connect the Propane Gas Components Ignition and Start Up Ignition and start up in Automatic ModeFault Codes Page Page Page Page Page Page Art01590
Related manuals
Manual 18 pages 14.54 Kb

120x specifications

The Norcold 120X is a prominent choice in the realm of absorption refrigerators, particularly favored in recreational vehicles (RVs), campers, and various off-grid applications. Boasting a range of features and technologies, the Norcold 120X presents a combination of efficiency, reliability, and convenience for users seeking a dependable cooling solution.

One of the standout features of the Norcold 120X is its dual-power capability. This versatile refrigerator can operate using both AC (alternating current) and DC (direct current) power, offering users flexibility depending on their energy source. Additionally, it can run on propane gas, which is ideal for off-grid scenarios where electric power may be limited. This multi-fuel functionality ensures that users can always rely on the Norcold 120X for consistent cooling, regardless of their location.

The Norcold 120X is designed with user convenience in mind. It features an intuitive control panel that allows users to easily monitor and adjust the temperature settings. With adjustable shelves and door bins, the interior layout can accommodate various food items and maximize storage efficiency. The refrigerator's sleek and compact design ensures it fits seamlessly into smaller spaces typically found in RVs or campers.

Another important characteristic of the Norcold 120X is its advanced absorption cooling technology. Utilizing a unique combination of ammonia and water as refrigerants, the absorption system produces minimal noise levels, making it a suitable choice for those seeking a quiet environment. Furthermore, the absence of mechanical compressors helps to reduce energy consumption, enhancing its overall efficiency.

In terms of insulation, the Norcold 120X boasts high-performance thermal insulation that enhances its cooling capabilities. This feature helps maintain internal temperatures even in hotter external environments, ensuring food and beverages remain fresh for extended periods.

Safety is also a priority with the Norcold 120X, which includes features such as a safety shut-off valve and a robust exterior casing to withstand the rigors of travel.

Overall, the Norcold 120X represents a fusion of innovative technology and practical design. With its reliability, energy efficiency, and user-friendly features, it undoubtedly stands out as a leading choice for those in need of a dependable refrigeration solution on the road.