Norcold 120x Interior light, Door alarm, Moisture reduction heaters, Temperature control system

Page 6

To remove or move the shelves of the fresh food compartment:

-Remove the screws [4] from each retainer [5] on the side of the refrigerator (See Art00992).

-Remove both retainers.

-Pull each shelf forward out of the slot.

-Push each fully into the slot that you wish.

-Install both retainers with the screws.

Interior light:

The interior light is at the top of the fresh food compartment. It comes on when the refrigerator is ON and the door is open. To replace the bulb:

1.Remove the DC power supply wires from the power board at the rear of the refrigerator.

2.Remove the cover [1] by pulling it toward the front of the refrigerator (See Art00988).

3.Remove the light bulb [2] from the holder [3].

NOTE: Use only a GE#214-2 bulb as the replacement bulb. This bulb is available at most retail automotive parts centers.

4.Install the replacement bulb.

5.Install the cover.

6.Connect the DC power supply wires to the power board at the rear of the refrigerator.

Door alarm:

The refrigerator has an alarm to alert you if the fresh food compartment door is not closed. The refrigerator continues to operate, but if the fresh food compartment door is open and the interior light remains on for two minutes:

-An audible alarm starts.

-“dr” appears in the center display.

-The interior light automatically turns off. Close the door to silence the alarm.

Moisture reduction heaters:

The refrigerator has heaters that prevent moisture from forming on the center divider between the two doors of the freezer compartment and on the movable door seal. The heaters operate only when the refrigerator is ON and the DC power is sufficient. The heater in the movable door seal also only operates when the left door of the fresh food compartment is closed.

Temperature control system:

Although the refrigerator is not frost -free, it is made to limit frost on the cooling fins. At regular intervals, the temperature control system automatically melts most of the frost from the cooling fins. The water from the cooling fins drains into a collection cup that is attached to the back of the refrigerator. The heat of the cooling system evaporates the water from the collection cup.

Backup operating system:

This refrigerator has a backup operating system. The backup operating system allows the refrigerator to continue to cool if the temperature sensor of the refrigerator should fail.

If this failure occurs:

-The refrigerator automatically changes to the backup operating system.

-When you push the SET TEMP button, the temperature setting flashes in the center display for ten seconds.

-After the temperature setting flashes, the mode of operation appears in the center display.

-The backup operating system can overfreeze or thaw the contents of the freezer and the fresh food compartment.

-Make sure the temperatures of the freezer and the fresh food compartment are satisfactory.

NOTE: If you open the door(s) too often, the tempera- tures inside the freezer and fresh food compart- ment do not become stable. Allow the refrigera- tor to operate for about one hour after each adjustment change before you examine the contents. The number “9” is the coldest temperature setting.

-If the temperature is too warm, push and hold the SET TEMP button to raise the temperature setting by one number.

-If the temperature is too cold, push and hold the SET TEMP button to lower the temperature setting by one number.

-Have the refrigerator serviced by your dealer or a Norcold authorized Service Center as soon as possible.

Owner’s Manual 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents English Table of Contents Norcold Gas Absorption 3 Year Limited Warranty PolicyGas Absorption Warranty Information Gas Absorption Warranty QuestionsLegal rights Storage Volume Safety AwarenessSafety Instructions About Your RefrigeratorFreezer compartments Adjustable shelvesFood compartment Door handlesBackup operating system Door alarmTemperature control system Interior lightControl panel Automatic mode operationOperating the Refrigerator Controls Removing air from the propane gas supply linesSet the controls to Automatic mode operation Set the controls to manual mode operationEffects of High Altitude on Propane Gas Operation Defrosting Refrigerator Care ChecklistIce Maker Optional Ice maker operationDoor Sealing CleaningRefrigerator Maintenance Checklist Refrigerator StorageIce Maker Storage Optional Refrigerator MaintenanceRemove and clean the burner orifice Gas flame appearanceReinstall the Refrigerator Remove the RefrigeratorWiring Diagram Replacement PartsWiring Pictorial Ice Maker Wiring Pictorial and Diagram OptionalFault Codes Page Page Art01606
Related manuals
Manual 18 pages 6 Kb

120x specifications

The Norcold 120X is a prominent choice in the realm of absorption refrigerators, particularly favored in recreational vehicles (RVs), campers, and various off-grid applications. Boasting a range of features and technologies, the Norcold 120X presents a combination of efficiency, reliability, and convenience for users seeking a dependable cooling solution.

One of the standout features of the Norcold 120X is its dual-power capability. This versatile refrigerator can operate using both AC (alternating current) and DC (direct current) power, offering users flexibility depending on their energy source. Additionally, it can run on propane gas, which is ideal for off-grid scenarios where electric power may be limited. This multi-fuel functionality ensures that users can always rely on the Norcold 120X for consistent cooling, regardless of their location.

The Norcold 120X is designed with user convenience in mind. It features an intuitive control panel that allows users to easily monitor and adjust the temperature settings. With adjustable shelves and door bins, the interior layout can accommodate various food items and maximize storage efficiency. The refrigerator's sleek and compact design ensures it fits seamlessly into smaller spaces typically found in RVs or campers.

Another important characteristic of the Norcold 120X is its advanced absorption cooling technology. Utilizing a unique combination of ammonia and water as refrigerants, the absorption system produces minimal noise levels, making it a suitable choice for those seeking a quiet environment. Furthermore, the absence of mechanical compressors helps to reduce energy consumption, enhancing its overall efficiency.

In terms of insulation, the Norcold 120X boasts high-performance thermal insulation that enhances its cooling capabilities. This feature helps maintain internal temperatures even in hotter external environments, ensuring food and beverages remain fresh for extended periods.

Safety is also a priority with the Norcold 120X, which includes features such as a safety shut-off valve and a robust exterior casing to withstand the rigors of travel.

Overall, the Norcold 120X represents a fusion of innovative technology and practical design. With its reliability, energy efficiency, and user-friendly features, it undoubtedly stands out as a leading choice for those in need of a dependable refrigeration solution on the road.
Top Page Image Contents