5. Installation:
5.1.NexStar 2 External 3.5” HDD Enclosure:
5.1.1.Hardware Installation:
Preparing the hard drive:
1)Set the hard drive jumpers to MASTER or SINGLE DRIVE ONLY. Please refer to the documentation included with your hard drive for information on how to accomplish this.
2)Place the vibration dampener on the hard drive as pictured below and screw it in place. (note: The lip of the vibration dampener is on the bottom of the hard drive.)
Vibration Dampener
3)Repeat with the second vibration dampener so that the hard drive appears as below.
6 | Installation: NexStar 2 External 3.5” HDD Enclosure |