Universal SPC-150T, 80-FAP operating instructions Operating Precautions Safety Precautions

Page 2

OPERATING PRECAUTIONS

 

SAFETY PRECAUTIONS

This is a propane, direct-fired, forced air heater. It's intended

1.

Check the heater thoroughly for damage. DO NOT

use is primarily temporary heating of buildings under construc-

 

operate a damaged heater.

tion, alteration or repair.

2.

DO NOT modify the heater or operate a heater which

 

 

 

 

has been modified from its original condition.

!

WARNING

 

 

 

3.

Use only propane gas.

NOT FOR HOME OR RECREATIONAL VEHICLE USE

 

4.

Use only VAPOR WITHDRAWAL propane supply. If

 

 

 

 

there is any question about vapor withdrawal, ask

 

 

 

 

your propane dealer.

Propane is heavier than air. If propane leaks from a connection

5.

Mount the propane cylinders vertically (shutoff valve

or fitting, it sinks to the floor, collecting there with the surround-

 

up). Secure them from falling or being knocked over

ing air, forming a potentially explosive mixture. Obviously,

 

and protect them from damage.

propane leaks should be avoided, so set up the propane supply

6.

Locate propane containers at least 7 ft. from the

with utmost care. Leak check new connections or reconnections

 

heater and do not direct exhaust toward containers.

with a soap and water solution and follow all connection

7.

Use only the hose and regulator assembly provided

instructions herein. Also, ask your propane dealer for advice

 

with the heater. Inspect hose assembly before each

on the propane supply installation and ask him to check it if

 

use of the heater. If there is excessive abrasion or

there are any questions.

 

wear, or hose is cut, replace with hose assembly

 

 

 

 

listed on parts list before using heater.

Direct-Fired means that all of the combustion products enter

8.

For indoor use only. Area must be well ventilated.

the heated space.

Even though this heater operates very

 

Provide minimum openings of 2 sq. ft. near the floor

close to 100 percent combustion efficiecy, it still produces

 

and 2 sq. ft. near the ceiling (also see "Operating

small amounts of carbon monoxide. Carbon monoxide (called

 

Precautions").

CO) is toxic. We can tolerate small amounts but not a lot. CO

9.

If at any time gas odor is detected, IMMEDIATELY

can build up in a heated space and failure to provide adequate

 

DISCONTINUE operation until the source of gas has

ventilation could result in death. The symptoms of inadequate

 

been located and corrected.

ventilation are:

 

 

10.

Install the heater such that it is not directly exposed to

headache

 

 

 

water spray, rain and/or dripping water.

dizziness

 

 

11.

Maintain minimum clearance from normal combust-

burning eyes and nose

 

ible material (like paper) as follows:

nausea

 

 

 

floor-0 ft.;outlet-6 ft.; sides-1 ft.; top-3 ft. Locate 10 ft.

dry mouth or sore throat

 

from canvas or plastic tarpaulins or similar coverings

So, be sure to follow advice about ventilation in these operating

 

and secure them to prevent flapping or movement

instructions.

 

 

 

due to wind action.

 

 

 

12.

Operate only on a stable, level surface.

Forced Air means that a blower or fan pushes the air through

13.

Do not use with ductwork. Do not restrict inlet or exit.

the heater. Proper combustion depends upon this air flow;

14.

Use only the electrical power specified. The electri-

therefore, the heater must not be revised, modified or oper-

 

cal connection and grounding must comply with

ated with parts removed or missing. Likewise, safety systems

 

National Electrical Code - ANSI/NFPA 70.

must not be circumvented or modified in order to operate the

15.

Use only a properly grounded 3-prong receptacle or

heater.

 

 

 

extension cord.

 

 

 

16.

Do not move, handle or service while hot or burning.

When the heater is to be operated in the presence of other

17.

Use only in accordance with local codes or, in the

people the user is responsible for properly acquainting

 

absence of local codes, with the Standard for the

those present with the safety precautions and instruc-

 

Storage and Handling of Liquefied Petroleum Gases

tions, and of the hazards involved.

 

ANSI/NFPA 58-1998.

WARNING: FIRE, BURN, INHALATION, AND EX-

PLOSION HAZARD. KEEP SOLID COMBUSTIBLES, SUCH

AS BUILDING MATERIALS, PAPER OR CARDBOARD, A

SAFE DISTANCE AWAY FROM THE HEATER AS RECOM-

MENDED BY THE INSTUCTIONS NEVER USE THE HEATER

IN SPACES WHICH DO OR MAY CONTAIN VOLATILE OR

AIRBORNE COMBUSTIBLES, OR PRODUCTS SUCH AS

GASOLINE, SOLVENTS, PAINT THINNER, DUST PAR-

TICLES OR UNKNOWN CHEMICALS.

Page 2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Retain These Instructions for Future Reference Heater SpecificationsForced AIR General Hazard WarningOperating Precautions Safety Precautions Not for Home or Recreational Vehicle USESize and Capacity of Propane Cylinders Propane Fuel PrecautionsOperating Instructions Preparing for OperationFAST/SPC-150FAST 1550Instructions for Ordering Parts Wiring Diagram Wiring ChartColor Length From Scheu Products COMPANY, Incorporated HOW Much Heat do I REQUIRE?Btus PER Hour Required Plant 8855 Baker AVE., Rancho CUCAMONGA, CA

80-FAP, SPC-150T specifications

The Universal SPC-150T,80-FAP is a sophisticated platform designed for both industrial and commercial applications, providing robust performance and versatile functionality. Tailored for sectors that demand high accuracy and reliability, this unit stands out for its advanced technologies and user-friendly features.

One of the key characteristics of the SPC-150T,80-FAP is its high-performance processing power, which enables it to handle complex tasks with ease. The unit is equipped with a cutting-edge processor that ensures rapid data processing and effective multitasking. This is particularly beneficial in environments where time is critical, allowing operators to achieve optimal productivity levels.

The SPC-150T,80-FAP also boasts an intuitive interface, designed to enhance user interaction. The display is clear and easy to navigate, enabling users to access various functions effortlessly. This streamlined user experience reduces the learning curve for new operators and minimizes the likelihood of errors during operation.

In terms of connectivity, the SPC-150T,80-FAP is equipped with multiple ports and wireless capabilities, allowing seamless integration with other devices and systems. This facilitates real-time data sharing and enhances collaboration across different teams and departments. The ability to connect to a network also enables remote monitoring and control, providing users with greater flexibility.

Durability is another hallmark of the SPC-150T,80-FAP. Constructed from high-quality materials, the platform is built to withstand the rigors of industrial environments. Its robust design means that it can operate effectively in challenging conditions, ensuring longevity and consistent performance.

Moreover, the SPC-150T,80-FAP incorporates advanced safety features that prioritize operator protection. These include overload protection, emergency stop functionality, and comprehensive fault detection systems. Such features contribute to a safer working environment, minimizing risks associated with equipment failure.

The unit also supports a range of applications thanks to its modular architecture. With the ability to customize components based on specific needs, users can adapt the SPC-150T,80-FAP for various tasks, leading to improved efficiency and reduced operational costs.

In summary, the Universal SPC-150T,80-FAP is a powerful and versatile solution that meets the demands of modern industries. With its performance, durability, user-friendly interface, and extensive connectivity options, it serves as an ideal choice for organizations aiming to enhance productivity and maintain high standards of operational efficiency.
Top Page Image Contents