Gemini CDM-3200 manual Introduction, Features, Safety Specifications, Precautions, Connections

INTRODUCTION:

Congratulations on purchasing the Gemini CDM-3200 Dual CD Mixing Console. This unit is backed by a (1) year war- ranty. Prior to use, we urge that you understand all the in- structions.

FEATURES:

Player Section:

-Audio CD & CD-R compatible

-Mechanical anti-shock

-Large blue backlit LCD display

-2 Selectable Jog modes Search & Pitch Bend

-Instant-start & cue with preview

-Fader-Start capability

-+10 track button for quick navigation

-Single & Continuous play modes

-One seamless loop per side with reloop

-Pitch bend via jog wheel or buttons +/- 16%

-Three mode time selection

-Frame accurate search

-Rubber jog wheels with finger grips

-Variable pitch control with a +/- 12% range

Mixer Section:

-2-band EQ w/ Gain Control

-1/4” headphone output

-XLR balanced outputs and 1/4” mic input

-Auxiliary Inputs for Line devices

SAFETY SPECIFICATIONS:

Laser Diode Properties

Material: Ga - Al - As

Wavelength: 755 - 815 nm (25° C)

Laser Output: Continuous Wave, max. 0.5 mW

PRECAUTIONS:

1.Do not use this CD player at temperatures below 41°F/5°C or higher than 95°F/35°C.

2.The apparatus should not be exposed to dripping or splash- ing, and no objects filled with liquids such as vases should be placed on the apparatus.

3.Place the unit in a clean and dry location.

4.Do not place the unit in an unstable location.

5.When disconnecting the power cord from the AC outlet, always grasp by the plug. Never pull the power cord.

6.To prevent electric shock, do not remove the cover or the bottom screws.

7.There are NO USER SERVICEABLE PARTS INSIDE.

Please refer to a qualified technician.

(IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT: 1(732) 346-0061. DO NOT ATTEMPT TO RETURN THIS EQUIP-

MENT TO YOUR DEALER)

CDM-3200

8.Do not use chemical solvents to clean the unit.

9.Keep the laser pickup clean by keeping the tray closed.

10.Keep this manual in a safe place for future reference.

CONNECTIONS:

1POWER: Plug in the power cord of the CDM-3200.

2LINE INPUTS: The CDM-3200 has 2 LINE RCA INPUTS. You may connect any line level device as described before (MP3, CD, Tape etc). Now you may plug the RCA’s from your play- able medium into each input to be connected to its respective

CHANNELS.

3MASTER RECORD RCA OUTPUT (UNBALANCED): The MASTER RCA output connects the mixer to your main ampli- fier using standard audio cables with RCA-type connectors.

The RECORD RCA OUTPUT jacks can be used to connect the mixer to the record input of your recording unit, thus enabling you to record your mix with RCA cables.

4MASTER XLR OUTPUT (BALANCED): Allows you to connect balanced XLR cables to MASTER OUTPUT of the CDM-3200 both the RCA and XLR outputs can be used at the same time but both are controlled via the same MASTER OUTPUT.

5MIC (MICROPHONE) INPUTS: The main MIC or Microphone inputs are located at the back right hand corner and front panel of the CDM-3200 and will accept a 1/4” connector. You can control the volume for the mic (See CONTROLS ) below.

6HEADPHONE OUTPUTS: The HEADPHONE OUTPUT lo- cated front center of the CDM-3200 will accept any headphone with a standard 1/4” connector and/or adaptor and will allow you to CUE your music program before you play it, you can adjust the volume and PGM mix of the HEADPHONE (see CONTROLS) below.

FUNCTIONS:

7POWER: Once you have connected all your cables, you can turn the CDM-3200’s POWER on by pressing the POWER but- ton, pressing the button a second time will turn off the unit.

8DISC TRAY: The DISC TRAY is where the CD is held during loading, unloading and playback, and holds both 12 cm and 8 cm CD’s. (DO NOT FORCE THE CD TRAY TO CLOSE. EX-

CESSIVE FORCE WILL DAMAGE THE CD MECHANISM, USE THE OPEN AND CLOSE BUTTONS)

9EJECT BUTTON: Pressing the EJECT BUTTON will open or close the DISC TRAY. The DISC TRAY will not eject in PLAY mode.

10JOG WHEEL: In SEARCH MODE the JOG WHEEL can be used to search forward or backwards in the music track, as well as for fine adjustments to a CUE point in PAUSE mode. In

4