Vinotemp VT-16TEDS owner manual Care and Maintenance, Using the Buttons on the Display Panel

Page 9

Using the Buttons on the Display Panel

You can set the temperature by pushing the control buttons.

There are two buttons on the panel “ + ” and “ - ” to adjust the temperature by 1°F increments from 54-66°F. You can turn the interior light on or off by pressing the light button.

CARE AND MAINTENANCE

Cleaning Your Wine Cellar

Unplug the wine cellar and remove the bottles.

Wash the inside with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.

The outside of the wine cellar should be cleaned with mild detergent and warm water.

Unscrew the water box at the bottom, and wash it.

Wipe dry with a soft cloth.

Moving Your Wine Cellar

Remove all the bottles.

Securely tape down all loose items inside your wine cellar.

Turn the leveling legs up to the base to avoid damage.

Tape the door shut.

Be sure the wine cellar stays in the upright position during transportation.

1 7 6 3 1 S . S u s a n a R o a d , R a n c h o D o m i n g u e z , C A 9 0 2 2 1

9

info@vinotemp.com

 

Image 9
Contents N e C e l l a r Serving Wines Your Wine CellarTable of Contents General Operating Instructions Important Safety InstructionsElectrical Connection Circuit Diagram Cabinet DiagramSNN Technical DataOperating Your Wine Cellar Installation InstructionsUsing the Buttons on the Display Panel Care and MaintenanceTroubleshooting Guide Problems with Your Wine CellarTerms of Sale and Warranty Service & Important Notice