Vinotemp VT-18TEDS owner manual Installation Instructions, Operating Your Wine Cellar

Page 8

INSTALLATION INSTRUCTIONS

Before Using Your Wine Cellar:

Remove any exterior and interior packing material.

Check to be sure the following parts are included:

For 18-Bottle Wine Cellar, 5 slide out shelves.

1 instruction manual.

Before connecting the appliance to the power source, let it stand upright for approximately 12 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.

To level your appliance, adjust the front legs at the bottom of the appliance.

Designed for freestanding installation only, away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Several inches clearance must be given at rear for proper air circulation.

Clean the interior surface with lukewarm water using a soft cloth.

OPERATING YOUR WINE CELLAR

It is recommended that you install the wine cellar in a place where the ambient temperature is between 50-80°F. If the ambient temperature is above or below recommended temperature, the performance of the unit may be affected. Placing in extreme cold or hot conditions may cause interior temperature to fluctuate. The range of 54-66°F may not be reached. Not intended for garage or basement installs. The temperature may fluctuate depending on whether or not the interior light is on or off or whether the bottles are located on the upper/middle or lower section. Close the cellar door immediately after putting in any items so the inside temperature will not rise dramatically.

8

W W W . V I N O T E M P . C O M

Image 8
Contents N e C e l l a r Your Wine Cellar Serving WinesTable of Contents Important Safety Instructions General Operating InstructionsElectrical Connection Cabinet Diagram Circuit DiagramTechnical Data VT-18TEDSInstallation Instructions Operating Your Wine CellarCare and Maintenance Using the Buttons on the Display PanelProblems with Your Wine Cellar Troubleshooting GuideTerms of Sale and Warranty Service & Important Notice

VT-18TEDS specifications

The Vinotemp VT-18TEDS is a standout in the field of wine coolers, designed for both wine enthusiasts and casual drinkers who require a reliable storage solution. This refrigerator has quickly gained popularity for its sleek design, efficient storage capabilities, and advanced features that cater to the needs of any wine lover.

One of the main features of the VT-18TEDS is its impressive capacity, which comfortably holds up to 18 standard wine bottles. This makes it perfect for small to moderate collections, ensuring that your favorite wines are stored at an optimal temperature. The unit is crafted with a beautiful black exterior that fits seamlessly into any kitchen, dining room, or entertainment area, and its clear door offers a glimpse of your collection without compromising temperature control.

The VT-18TEDS utilizes a sophisticated cooling system that ensures your wine is stored at the ideal temperature. With adjustable temperature controls ranging from 40 to 65 degrees Fahrenheit, users can create the perfect environment for different types of wines, whether they are red, white, or sparkling. This wide range of temperature settings makes it highly versatile for various wine preferences.

Technologically, the wine cooler features a digital display that allows users to monitor and adjust the temperature with ease. The soft LED lighting inside the unit enhances visibility while maintaining a stylish appearance without generating excess heat. Additionally, the wine cooler is equipped with a vibration-free cooling system, which is essential for preserving the integrity and taste of wine. Excess vibrations can disturb sediments, potentially harming the flavor profile.

Another notable characteristic of the VT-18TEDS is its wooden shelves. The shelves are designed not only for aesthetics but also for functionality, as they provide strong support for wine bottles while allowing for easy access and organization. The robust design ensures that bottles are securely held in place, preventing any unwanted movement.

In conclusion, the Vinotemp VT-18TEDS wine cooler combines functionality, aesthetics, and advanced technology to create an ideal environment for any wine collection. Its capacity, temperature control, and thoughtful design elements make it a reliable choice for wine enthusiasts and anyone looking to elevate their home drinking experience. With this appliance, preserving the quality and enjoying the sophisticated world of wine becomes effortless.