Installation Instructions
INSTALLATION—VENTED TO THE OUTSIDE
INSTALL FILTERS
IMPORTANT: Check to be sure that the main ON/OFF
switch next to the motor is in the ON position.
•Remove protective films on the grease filters and
filter cover panel.
NOTE: The charcoal filter is not required for this
installation.
•Tip the filter into the left or right side of
the opening. Lift the filter to the opposite
side and into the filter lock.
•To remove the filter, push the latch toward
the center and pull downward.
•To close the filter cover panel, push up on both
sides at the front corners to engage the latch.
8FINALIZE INSTALLATION
•Check to be sure all tape and packaging materials
have been removed.
•Refer to the Owner’s Manual for operating
instructions.
9
Push-button
switch
(horizontal
view from
inside
opening)
13