Installation Preparation
REMOVE THE PACKAGING
CAUTION: Wear gloves to protect against
sharp edges.
•Remove duct covers.
• Remove the parts box and other pieces. Locate
the literature package.
• Remove and properly discard the protective plastic
wrapping and other packaging materials.
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
Tape measure
Knife
Spirit level
Wire cutter/stripper
Wire nuts
Electric drill with 1/8″and 3/8″bits
Phillips and flat blade screwdrivers
Hammer
Pliers
Safety glasses
Aluminized duct tape
Tape to mount template
Gloves to protect against sharp edges
120V 60Hz. 15 or 20 Amp, 2 wire with
ground Properly grounded branch circuit
Strain relief for junction cover
8″round metal duct, length to suit
installation
Saw, jig saw or reciprocating saw
Tin snips
Measuring tape
Electric drill
with 1/8” and
3/8” Bits
12” long
Phillips
head
screwdriver
Safety glasses
Gloves
Spirit level
Knife
Wire
cutter/stripper
Flat blade
screwdriver
Hammer
Pliers
Aluminized
duct tape
Masking tape
Wire nuts
Strain relief
Saw, jig saw or
reciprocating
saw
6
8″round metal duct,
length to suit
installation
Tin snips