Installation Instructions

INSTALLATION—RECIRCULATING

2 INSTALL HOOD MOUNTING SCREWS

The mounting screws must enter the horizontal support or wall studs.

With the template taped in place, use a punch to mark mounting bracket screw locations.

Drill 1/8pilot holes in 2 of the punched locations in the lower bracket.

Remove the template.

Install the mounting screws; leave 1/4gap between

the screw head and the wall. This will allow the keyhole slot on the hood frame to engage the screw head.

1-1/4

 

 

 

 

 

 

 

1-1/4

 

 

 

 

10-1/16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REAR WALL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MOUNTING TEMPLATE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9-7/16

 

15-7/16

 

15-7/16

 

9-7/16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation Height

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation Height

 

 

 

 

 

Align Bottom Edge With

 

 

 

 

Align Bottom Edge With

 

 

 

 

 

Pencil Line Indicating

 

 

 

 

 

Pencil Line Indicating

 

 

 

 

 

Bottom of Hood

 

 

 

 

 

 

Bottom of Hood

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMPORTANT: Use the mounting screws provided. DO NOT USE DRYWALL SCREWS.

Check to be sure the mounting screws are horizontally level.

3 INSTALL DUCT BRACKET

The duct bracket should be installed against the back wall and flush with the ceiling. This bracket will hold the duct cover in place at the top.

Secure the bracket to the wall:

Align the diamond centerline cutout on the bracket to the penciled centerline on the wall.

Mark 2 screw hole locations in the wall.

Drill 1/8pilot holes in the marked locations.

If pilot holes do not enter wood studs, enlarge the holes to 3/8and install metal wall fastener anchors (provided).

If mounting directly to a masonry wall, obtain appropriate #10 masonry screw anchors. Drill and install per the fastener supplier’s instructions.

Drive screws, by hand, into the fasteners to allow anchors to expand. Remove the screws.

Secure the bracket to the wall with wood screws and/or fasteners.

4 MOUNT THE HOOD

WARNING:2 people are required to lift and position the hood onto the mounting screws.

Lift the hood onto the mounting screws.

Check level and mark bottom screw locations.

Remove the hood.

Drill 1/8pilot holes in the marked location.

If pilot holes do not enter studs, enlarge the holes to 3/8and install metal wall fastener anchors (provided).

Lift the hood onto the mounting screws.

Install lower screws to pull the hood tight against the wall.

Tighten the top mounting screws.

Tighten screws

Install

screws

Centerline cutout

15

Page 15
Image 15
GE ZV830 manual Check to be sure the mounting screws are horizontally level

ZV830 specifications

The GE ZV830 is a groundbreaking and sophisticated addition to the lineup of kitchen appliances, designed to elevate both functionality and aesthetics. Packed with a range of advanced features, the ZV830 stands out as a state-of-the-art microwave that not only meets but exceeds modern culinary demands.

One of the standout characteristics of the GE ZV830 is its sleek and modern design, which seamlessly integrates into any kitchen decor. The appliance features a stainless-steel finish that is not only visually appealing but also easy to clean, making it a practical choice for busy homeowners. The unit is designed for installation over a range or cooktop, freeing up counter space while providing powerful cooking capabilities.

The ZV830 is equipped with a robust 1.7 cubic feet capacity, providing ample space for cooking large dishes or multiple items simultaneously. This microwave offers an impressive 1,000 watts of cooking power, ensuring quick and efficient heating, defrosting, and cooking of food.

One of the key technologies implemented in the GE ZV830 is its sensor cooking feature. This advanced technology allows the microwave to automatically adjust cooking times and power levels based on the moisture released from the food. As a result, users can achieve perfectly cooked meals without the guesswork traditionally associated with microwave cooking.

Additionally, the GE ZV830 boasts a range of convenient cooking presets and auto-reheat options, streamlining meal preparation. Features such as popcorn settings and pizza reheating options make it a versatile tool for any kitchen. The unit also includes a dedicated steam function, which is perfect for health-conscious individuals looking to prepare steamed vegetables easily.

Highly regarded for its user-friendly interface, the GE ZV830 includes a large LED display that provides clear visibility of cooking settings and times. The straightforward keypad allows for easy input, making it accessible for all users, including those less familiar with kitchen technology.

Furthermore, the GE ZV830 is designed with safety in mind. It includes child lock features to prevent unintended use, offering peace of mind for families. In conclusion, the GE ZV830 is an exemplary microwave that combines design, performance, and innovative technology to enhance the cooking experience. Its advanced features and user-centric design make it a valuable addition to any modern kitchen.