Vinotemp VINO2500-6500SSR, VINO2500-4500SSR, VINO2500-2500SSR manual Manual Defrost

Page 19

2.The value of the set point will be displayed and the “°C” or “°F” LED starts blinking;

3.To change the Set value, push the o or n arrows within 10s.

4.To memorize the new set point value, push the SET key again or wait 10s.

4) Humidity Adjustment

The parameter Fon is used to adjust the humidity in the wine cabinet. The higher value of Fon, the higher relative humidity will be.

1.Press the Set + keys for 3 sec until the “°C” or “°F” LED starts blinking.

2.Release the keys, then push again the Set + keys for more than 7sec, the Pr2 label will be displayed.

3.Release the keys, select the required parameter Fon by up or down keys.

4.Press the “SET” key to display its value.

5.Use up or down keys to change its value.

6.The default value is 0, change high or low value to maintain high or low humidity.

7.Press “SET” to store the new value.

8.To exit: Press SET + or wait 15sec without pressing a key.

5) Regulation Differential

The parameter Hy is used as intervention differential for set point. Compressor cut-in is the set-point + Hy, and compressor cut-out is the set-point.

1.Press the Set + keys for 3 sec until the “°C” or “°F” LED starts blinking.

2.Release the keys, then push again the Set + keys for more than 7sec, the Pr2 label will be displayed.

3.Release the keys, HY will display immediately.

4.Press the “SET” key to display its value.

5.Use up or down keys to change its value.

6.The default value is 4, change high or low value to result in long high or short running cycle.

7.Press “SET” to store the new value.

8.To exit: Press SET + or wait 15sec without pressing a key.

6) Defrost Cycle

The parameter IdF is used as interval between defrost cycles.

1.Press the Set + keys for 3 sec until the “°C” or “°F” LED starts blinking.

2.Release the keys, then push again the Set + keys for more than 7sec, the Pr2 label will be displayed.

3.Release the keys, select the required parameter IdF by up or down keys.

4.Press the “SET” key to display its value.

5.Use up or down keys to change its value.

6.7. Press “SET” to store the new value.

8.To exit: Press SET + or wait 15sec without pressing a key.

7) Manual Defrost

Push the DEF key for more than 2 seconds and a manual defrost will start.

- 18 -

Page 18 Page 20
Image 19
Page 18 Page 20
Contents WINE-MATESplit System Installation, Operation & Care Manual Table of Contents Important Safety Information CFM Cond Unit Feature DescriptionWM25-45SFCR Evaporator Unit WM650SCU Condensing Unit Cellar Construction Condensing Unit Installer’s InstructionEvaporator Unit Refrigeration Piping and Charging Air SensorValve Operation Pressure, Superheat and Subcooling ReadingsVINO2500-4500SSR Electrical Wiring Diagram Vtstat Electrical WiringVINO2500-4500SSR Wiring Diagram Digital Controller VINO6500SSR Electrical Wiring Diagram Digital Controller Condensing Unit Troubleshooting Unit not running Temperature Setting Temperature Control & Humidity AdjustmentDip-switch description See detail in Vstat instruction Use of the Digital Controller Page Manual Defrost Care Guide Coil CleaningMoisture Removing User’s Troubleshooting Icing Unit runningToo long or EvaporatorCustomer Support Limited Warranty WarrantyService under Warranty Limitation of Implied Warranty

VINO2500-2500SSR, VINO2500-6500SSR, VINO2500-4500SSR specifications

Vinotemp has long been recognized as a premier manufacturer of wine cellars, and their latest offerings, the VINO2500-4500SSR, VINO2500-6500SSR, and VINO2500-2500SSR, continue this legacy of excellence. These modern wine refrigerators are designed to meet the diverse storage needs of wine enthusiasts, combining style, functionality, and advanced technology.

One of the standout features of these models is their ability to maintain optimal temperature control. Each unit is equipped with a powerful, energy-efficient compressor that ensures consistent temperatures between 40°F and 65°F. This range is crucial for preserving the delicate flavors and aromas of wine. The temperature can be easily adjusted via a digital control panel, allowing users to set it to their preference with precision.

Another key characteristic is the dual-zone cooling design found in the VINO2500-4500SSR and VINO2500-6500SSR models. This feature allows wine collectors to store both red and white wines at their ideal temperatures simultaneously. The dual-zone functionality enhances the versatility of these refrigerators, making them perfect for diverse wine collections. The separate zones are also equipped with individual temperature controls, ensuring that each type of wine is kept in its designated environment.

The construction quality of the Vinotemp refrigerators is noteworthy. They are designed with high-grade materials, including UV-protected glass doors that minimize harmful light exposure. This is essential for preserving wine quality, as excessive light can degrade wine over time. Additionally, the shelves are made of wood, providing a sturdy and attractive storage solution while minimizing vibration, which can disturb sediment in wine bottles.

Moreover, the VINO2500-6500SSR model features a stylish LED lighting system that illuminates the interior, allowing for easy visibility of your collection. The elegant design complements any decor, making these wine refrigerators as much a statement piece as a functional appliance.

Noise reduction is another area where these models excel. Engineered with a whisper-quiet compressor, they ensure that the environment remains peaceful, allowing wine lovers to enjoy their collections without distraction.

The Vinotemp VINO2500 range, including the 4500SSR, 6500SSR, and 2500SSR models, represents a blend of innovative technology and sophisticated design, catering to the needs of both casual drinkers and serious collectors alike. With superior temperature control, effective storage solutions, and aesthetic appeal, these wine refrigerators are essential for anyone looking to protect and showcase their wine collection.
Top Page Image Contents