Sibir Optics V 110 GE, V 170 GE manual Introduction, Transit Damage, Data Plate, Contents

OPERATING AND INSTALLATION INSTRUCTIONS FOR REFRIGERATORS V110 GE and V170 GE

INTRODUCTION

We are pleased that you have chosen this refrigerator and hope you will derive much satisfaction from using it, but first a few well-meant words of advice:

It is important to read through these instructions careful- ly before using the refrigerator.

To ensure good refrigeration and economical operation, the refrigerator must be installed and used as described in these instructions.

WARNING! The refrigerators are equipped with a lock. The key should be kept away from children at a place away from the refrigerator.

TRANSIT DAMAGE

Inspect the refrigerator for damage. Transit damage must be reported to whoever is responsible for delivery not later than seven days after the refrigerator was delivered.

DATA PLATE

Check the data plate, inside the refrigerator, to ensure that you have received the right model.

The right gas pressure is................. 30 mbar.

Check that the voltage supply corresponds with the supply voltage given on the data plate.

The data plate contains e. g. the following details:

Model designation .........................................

Product number .............................................

Serial number ................................................

Since these details will be needed if you have to contact service personnel, it is a good idea to make a note of them here.

CONTENTS
OPERATING INSTRUCTIONS	4
CONTROLS	4
STARTING THE REFRIGERATOR	4
REGULATING THE TEMPERATURE	4
DEFROSTING	4
CLEANING THE REFRIGERATOR	4
TURNING OFF THE REFRIGERATOR	5
IF THE ‘FRIDGE FAILS TO WORK	5
MAINTENANCE	5
SOME USEFUL HINTS	5
TECHNICAL DATA	5
INSTALLATION INSTRUCTIONS	5
PLACEMENT OF THE REFRIGERATOR ...	5
LP GAS CONNECTION	5
ELECTRICAL CONNECTION	6

3