Tyler Refrigeration TLM Mezzanine Shelving, Top Mounted Scale Shelf Installation, Lighted Shelves

Page 26

TLM, TLF, TLD

Mezzanine Shelving

Mezzanine shelves are available in 10” or 12” widths. One level of shelving is optionally available for TLM and TLF cases, while two levels of shelving is available for TLD cases. The shelves can be moved forward from the mullions in two inch increments and can be locked into three positions.

Price tag moldings will be attached to the front of each mezzanine shelf with screws. To clean the price tag molding, remove screws and molding from shelves. After cleaning, reattach molding to shelves with screws.

To install mezzanine shelving, position and insert the mezzanine shelf (1) and captive shelf brackets (2) into slots in the uprights (3).

NOTE

The brackets can be moved vertically at 1” increments in the uprights.

Lighted Shelves

Lights are optional on the 10” and 12” mezzanine shelves. Wiring harnesses for all shelf locations are factory installed. Ballasts are optionally supplied for all shelf light sockets. The ballasts are located in the rear raceway channel behind the rear rail cover.

Top Mounted Scale Shelf

Installation

The optional scale shelf is mounted to the mullion on the back of the case. The shelf rests on the flat portion of the top of the case. Use the follow instructions to mount the scale shelf assembly.

1.Remove the screws (1) and rear cover (2) from the scale shelf assembly (3).

2.Center the scale shelf assembly (3) on the top rear of the case (4) at the selected mullion (5) location.

3.Loosen wing nut (6) on the front right side of the lower rear support (7) and the two locking capscrews (8) at the rear.

4.Adjust scale shelf (3) to sit level from front-to-rear and side-to-side. When the shelf is level, retighten the wing nut (6) and the two locking capscrews (8).

5.Drill pilot holes in the top two holes in the lower rear support (7), and start two screws (9). Check for proper shelf alignment, then tighten two screws (9).

6.Drill pilot holes thru lower two holes in lower rear support (7) and secure with two screws (9).

7.Replace rear cover (2) and screws (1) on scale shelf assembly (3).

Page 26

April, 2007

Image 26
Contents Installation & Service Manual TLM, TLF, TLD Contents Lift-Glass Replacement Fan Blade & Motor ReplacementFront Glass Anti-Fogging System Service TLM, TLF, TLD Specifications TLM, TLF, TLD TLM, TLF, TLD Installation Procedures SeptemberCarpentry Procedures Case Line-UpLift Front Glass Leveling Instructions Bottom and End Close-off Installation Optional rear bottom close-offs do not require joint trimTemperature Control Refrigeration ProceduresOptional 2 Bumper Installation Typical Service Case with Gravity CoilSetting the Electronic Thermostat Typical Service Case with Blower CoilDefrost Information Wiring DiagramsElectrical Procedures July July July July July July July July TLM, TLF, TLD Cleaning and Sanitation Cleaning Instructions Stainless Steel Cleaning MethodsHeat tint or heavy Rear Sliding Door Removal and Installation General InformationLighted Shelves Top Mounted Scale Shelf InstallationMezzanine Shelving Light Servicing Service InstructionsBallast Replacement Ballast and Lighting LocationsFront Glass Anti-Sweat Replacement Light Shield Anti-Sweat ReplacementFront Glass Anti-Fogging System Service Glass is heavy and requires assistance for properly support Lift-Glass ReplacementFront Glass Anti-Fog Fan Replacement Lift-Glass Gas Piston Replacement Color Band, Bumper and Bumper Retainer Replacement Anti-Sweat Heater Wire Deflector Kit Replacement TLD Only November Operational Parts ListParts Information Case UsageCladding and Trim Parts List Item Description 12’May

TLM, TLD, TLF specifications

Tyler Refrigeration is a recognized leader in the refrigeration industry, providing innovative solutions aimed at enhancing energy efficiency and performance. Among their suite of products, the TLF, TLD, and TLM series stand out for their cutting-edge features and technologies.

The TLF series is particularly designed for accommodating large quantities of perishable goods. One of its key characteristics is the use of advanced insulation materials that not only enhance thermal efficiency but also reduce energy consumption. The TLF units come equipped with a user-friendly digital display that allows easy monitoring and precise temperature control. Additionally, the refrigeration system uses environmentally friendly refrigerants, ensuring compliance with modern sustainability standards.

The TLD series is optimized for versatility in commercial applications. These units are characterized by their adjustable shelving, which allows for flexible storage configurations. Moreover, the TLD series features a robust build quality, ensuring durability in high-traffic environments. An integrated energy management system is a highlight of the TLD line, providing real-time energy consumption data and helping operators to better understand their usage patterns. This feature not only aids in cost-saving measures but also aligns with broader efforts for environmental sustainability.

The TLM series focuses on maximizing space efficiency without sacrificing performance. What separates TLM from other models is its compact design, which is ideal for establishments with limited space such as convenience stores and small restaurants. The units utilize a state-of-the-art cooling technology, which guarantees even temperature distribution throughout the interior. The TLM series also incorporates smart technology, enabling remote monitoring and diagnostics. This capability allows operators to receive alerts for any temperature fluctuations or mechanical issues, ensuring the safety of stored products.

All three series feature a sleek design, allowing them to blend seamlessly into various environments, from grocery stores to industrial kitchens. Tyler Refrigeration has prioritized user convenience, ensuring that regular maintenance tasks can be performed easily, thus decreasing downtime.

In conclusion, Tyler Refrigeration's TLF, TLD, and TLM series showcase the company's commitment to innovation, efficiency, and reliability. With their unique features and modern technologies, these units not only enhance operational capabilities but also support sustainability in the refrigeration landscape. Whether for large-scale storage or compact applications, Tyler Refrigeration continues to set the standard for excellence in refrigeration solutions.