Tyler Refrigeration TLF, TLD, TLM service manual Lift-Glass Gas Piston Replacement

Page 30

TLM, TLF, TLD

NOTE

Note positioning and installation of top edge channel before removing.

3.Loosen set screws in back of top edge channel.

4.Using a flathead screwdriver, push down aluminum wedge inside top edge channel, until it rests in bottom of the channel. After wedge has been released from glass, remove the old glass from the top edge channel.

5.Position the top edge channel on the new glass panel in same position as removed.

NOTE

Glass must be fully inserted into top edge channel before tightening.

6.After glass is positioned in the top edge channel, tighten each set screw until glass is held into place by the aluminum wedge. Do not overtighten.

6.With aid of assistants, lift and tentatively position new glass assembly in the hinge slots. Tighten the hinge set screws. Do not overtighten.

7.Slowly lower glass to check position. If adjustment is necessary, raise glass and have assistants hold both ends. Loosen the hinge set screws, adjust the glass assembly position and retighten set screws to secure top edge channel in hinge slot. Do not overtighten.

Lift-Glass Gas Piston Replacement

WARNING

The TL series cases rely upon gas pistons to assist lifting the glass and holding it in the raised position. The glass is heavy and difficult for one person to lift alone while replacing a gas piston. Use an assistant to prevent possible glass breakage and/or personal injury.

Since gas pistons are very powerful when in compressed state, follow these cautions during replacement:

•Do not attempt to perform any work on case while piston is in compressed state.

•Raise glass to full UP position before beginning any work involving gas pistons.

•Do not attempt to alter a gas piston in any way.

•Do not expose a gas piston to excessive heat.

•Dispose of gas piston as soon as possible after removal.

Each lift glass panel uses four gas pistons and two hinges to support it. Example: 8’case has 2 lift glass panels with 4 hinges and 8 gas pistons.

1.Have an assitant lift and hold the glass in the full UP position. Note position and relationship of all glass lift components.

Page 30

April, 2007

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Installation & Service Manual TLM, TLF, TLD Contents Fan Blade & Motor Replacement Front Glass Anti-Fogging System ServiceLift-Glass Replacement TLM, TLF, TLD Specifications TLM, TLF, TLD TLM, TLF, TLD Installation Procedures SeptemberCarpentry Procedures Case Line-UpLift Front Glass Leveling Instructions Bottom and End Close-off Installation Optional rear bottom close-offs do not require joint trimTemperature Control Refrigeration ProceduresOptional 2 Bumper Installation Typical Service Case with Gravity CoilSetting the Electronic Thermostat Typical Service Case with Blower CoilWiring Diagrams Electrical ProceduresDefrost Information July July July July July July July July TLM, TLF, TLD Cleaning and Sanitation Cleaning Instructions Stainless Steel Cleaning MethodsHeat tint or heavy Rear Sliding Door Removal and Installation General InformationTop Mounted Scale Shelf Installation Mezzanine ShelvingLighted Shelves Light Servicing Service InstructionsBallast Replacement Ballast and Lighting LocationsLight Shield Anti-Sweat Replacement Front Glass Anti-Fogging System ServiceFront Glass Anti-Sweat Replacement Lift-Glass Replacement Front Glass Anti-Fog Fan ReplacementGlass is heavy and requires assistance for properly support Lift-Glass Gas Piston Replacement Color Band, Bumper and Bumper Retainer Replacement Anti-Sweat Heater Wire Deflector Kit Replacement TLD Only November Operational Parts ListParts Information Case UsageCladding and Trim Parts List Item Description 12’May

TLM, TLD, TLF specifications

Tyler Refrigeration is a recognized leader in the refrigeration industry, providing innovative solutions aimed at enhancing energy efficiency and performance. Among their suite of products, the TLF, TLD, and TLM series stand out for their cutting-edge features and technologies.

The TLF series is particularly designed for accommodating large quantities of perishable goods. One of its key characteristics is the use of advanced insulation materials that not only enhance thermal efficiency but also reduce energy consumption. The TLF units come equipped with a user-friendly digital display that allows easy monitoring and precise temperature control. Additionally, the refrigeration system uses environmentally friendly refrigerants, ensuring compliance with modern sustainability standards.

The TLD series is optimized for versatility in commercial applications. These units are characterized by their adjustable shelving, which allows for flexible storage configurations. Moreover, the TLD series features a robust build quality, ensuring durability in high-traffic environments. An integrated energy management system is a highlight of the TLD line, providing real-time energy consumption data and helping operators to better understand their usage patterns. This feature not only aids in cost-saving measures but also aligns with broader efforts for environmental sustainability.

The TLM series focuses on maximizing space efficiency without sacrificing performance. What separates TLM from other models is its compact design, which is ideal for establishments with limited space such as convenience stores and small restaurants. The units utilize a state-of-the-art cooling technology, which guarantees even temperature distribution throughout the interior. The TLM series also incorporates smart technology, enabling remote monitoring and diagnostics. This capability allows operators to receive alerts for any temperature fluctuations or mechanical issues, ensuring the safety of stored products.

All three series feature a sleek design, allowing them to blend seamlessly into various environments, from grocery stores to industrial kitchens. Tyler Refrigeration has prioritized user convenience, ensuring that regular maintenance tasks can be performed easily, thus decreasing downtime.

In conclusion, Tyler Refrigeration's TLF, TLD, and TLM series showcase the company's commitment to innovation, efficiency, and reliability. With their unique features and modern technologies, these units not only enhance operational capabilities but also support sustainability in the refrigeration landscape. Whether for large-scale storage or compact applications, Tyler Refrigeration continues to set the standard for excellence in refrigeration solutions.
Top Page Image Contents