U-Line U-1075BEVS-00, ULN-29RB-00 manual Wood Trim Finishing, Staining and final finish application

Page 11

Wood Trim Finishing

WARNING

You MUST remove the wood trim from the unit for staining or finishing to prevent permanent damage to the inner liner of the unit. Allow stain or finish to dry thoroughly (at least 24 hours for each coat) following the product manufacturer’s instructions before reinstallation. Not following this warning may cause the inner liner of the unit to have a permanent odor, which the warranty will not cover.

U-Line products featuring wine storage include wood-trimmed wine racks.

Models with wood colored wood trim come factory coated with a clear vinyl sealer without a finish coat applied, which will sufficiently protect the wood in normal use. You may coat the trim on the racks with stain or a final finish following these guidelines. If using custom wood trim also follow these guidelines.

If staining the trim, stain before applying any final finish. Review the following staining and final finish application and final finish-only application guidelines when staining or sealing the wood to ensure proper adhesion and durability of the finish.

NOTE: On glass door models the stain may appear darker when viewed through the glass.

Staining and final finish application:

IMPORTANT

DO NOT use oil-based stains on wood trim. Vapors from oil-based stains will permanently penetrate the liner and will not dissipate over time.

1.Remove all screws securing wood trim to interior parts, and remove the trim from the cabinet interior.

2.Lightly sand and clean wood.

3.Apply Minwax® Water-Based Wood Stain to wood with a synthetic bristle brush or a foam applicator. Allow stain to penetrate about three minutes. Before the stain is dry, take a stain dampened rag and remove any excess stain remaining. Wipe towards the grain with medium pressure to achieve the desired stain color.

4.After two hours, repeat step 2. This will even out the color of the wood.

5.Allow stain to dry for a minimum of three hours before applying the final finish.

6.If desired, sand the wood with very fine sandpaper to smooth the surface after staining.

7.Remove all dust from the wood, and apply one coat of Minwax® Polycrylic® Protective Finish using a synthetic bristle brush. Apply this finish in a thin coat following the grain. Apply the finish to the back and sides of the wood first, and allow it to dry for two hours. Apply the finish to the front side of the wood next, and allow it to dry for two hours. Sand with 220 grit sandpaper. Apply two morel coats of finish in the same manner, but do not sand the trim after applying the final third coat.

8.Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior parts.

Final finish-only application:

1.Remove all screws securing wood trim to interior parts, and remove the trim.

2.Lightly scuff sand the wood trim with 280 or finer grit sandpaper.

3.Remove sanding dust with a clean, dry cloth.

4.The factory-applied seal is compatible with almost all finishes. A low odor, water clean up, quick-drying finish such as Minwax® Polycrylic® Protective Finish is recommended (Minwax® Polycrylic® is an ultra fast-drying water-based finish). Apply a thin coat of a clear, protective finish, following the container label directions.

5.Lightly sand and reapply if desired.

Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior parts.

U-Line Wine Guide

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents USE and Care Guide Please Record Your Model Information Read and save this Use and Care GuideTable of Contents General Precautions Safety Alert DefinitionsBeverage Center Features All 1000 Series Models FeatureWine Captain Model and Beverage Center Features Wine Captain Model FeaturesControl Dial Air FlowInitial Startup Interior Lighting Adjusting Air TemperatureChecking Product Temperature To check the actual product temperature in the unitWhite Wines Looking Behind the LabelWine Selections Suggestions Red WinesTerminology Description Ideal Wine Storage ConsiderationsDo not remove the track rails from the cabinet Wine Rack Removal and InstallationWine Stocking Recommendation Staining and final finish application Wood Trim FinishingLeveling Light bulb Replacement15 & 29 Models Removing and Installing Door ShelvesRemoving and Installing Grille Installing the grilleReversing the door Door Alignment and AdjustmentDoor Reversability Prepare door for reinstallation Install bottom hingePrepare door for reinstallation For black or white doors Install top hinge, and doorDefrosting Exterior CleaningInterior Cleaning Interval Every Three Months Condensor CleaningStorage, Vacation and Moving Product DisposalTroubleshooting Guide Before Calling for ServiceIf Service is Required Replacement PartsDESIGNED, Engineered and Assembled in WISCONSIN, USA
Related manuals
Manual 19 pages 47.44 Kb

U-1075BEVS-13, U-1075BEVS-02, U-1075BEVS-00, U-1075WCS-15, U-1075BEVS-15 specifications

U-Line has built a reputation for producing high-quality, premium appliances aimed at enhancing the culinary experience in homes and commercial spaces alike. Among their impressive lineup, the U-Line ULN-29 series models stand out for their innovative features, stylish design, and advanced technologies that cater to the needs of modern users.

The U-Line ULN-29RWH-00 and its variants, including ULN-29RWH-25, ULN-29RB-06, ULN-29RWH-09, ULN-29RB-15, ULN-29RWH-23, ULN-29RB-00, ULN-29RB-13, and ULN-29RWH-15, are undercounter refrigeration units that redefine convenience and accessibility in food and beverage storage. One of the most notable features of these models is their capacity to accommodate a remarkable number of items while maintaining a compact design suitable for any kitchen or bar area.

The U-Line ULN-29 series employs advanced refrigeration technologies such as dual refrigeration systems, ensuring precise temperature control and consistent airflow throughout the interior. This not only enhances the longevity of stored items but also provides optimal storage conditions for everything from craft beers to fine wines. With a temperature range from 34°F to 70°F, users can store a variety of items as per their specific requirements.

These units also incorporate energy-efficient LED lighting, which not only illuminates the interior but does so in an environmentally friendly manner. This modern lighting technology enables users to easily see and access their items while also conserving energy.

A versatile shelving system allows for custom configuration within the storage space, enabling users to adjust the interior layout to accommodate different sized bottles or food items. Additionally, the glass door provides a clear view of the contents, making it easy to identify items at a glance.

A focus on user convenience is evident in the features that include digital touchpad controls, which simplify temperature adjustments and monitoring. Furthermore, the models offer a quiet operation, making them perfect for open-plan living spaces or home bars where noise levels must be kept to a minimum.

In summary, the U-Line ULN-29 series offers an impressive combination of innovative design, cutting-edge technology, and user-friendly features. Its stylish appearance, efficient performance, and adaptability make it a desirable addition to any kitchen or entertaining space, catering to the needs of those who appreciate both function and sophistication in their home appliances. Whether for personal use or in a commercial setting, the ULN-29 series serves as a testament to U-Line's commitment to quality and excellence in undercounter refrigeration.
Top Page Image Contents