U-Line BI98, SP18, BI95 Maintenance, Defrosting, Condenser Cleaning, Interval Every Three Months

Page 10

Maintenance

Proper maintenance of your U-Line product will ensure efficiency, top performance and long life. The maintenance intervals listed are based on normal conditions. You may want to shorten the intervals if you have pets or other special considerations.

Defrosting

Manual Defrost Models - Every Two Months (Minimum)

WARNING

DO NOT use any type of electrical heating device, ice pick, knife or other sharp instrument to defrost; this could damage the inner lining or refrigeration system and void the warranty.

ULIN_0239_A

Figure 7

To defrost:

1.Turn unit off.

2.Remove ice bucket and discard ice.

3.Place a towel or other absorbent material on bottom of unit.

4.If you would like, place warm water inside ice bucket. Then place ice bucket back into unit and close door.

5.After approximately one hour, remove ice bucket and discard water.

6.Allow the frost to completely melt naturally. Clean the interior and ice bucket using a mild non-abrasive detergent and warm water solution applied with a soft sponge or non-abrasive cloth. NOTE: DO NOT use any solvent-based or abrasive cleaners. They will discolor or damage the interior.

7.Dampen a soft sponge or non-abrasive cloth in clean water and wipe down the cabinet interior and ice bucket to remove any detergent residue. Rinse the sponge or cloth in clean water and repeat as necessary until the cabinet and ice bucket are clean.

IMPORTANT

DO NOT place ice bucket in dishwasher. Dishwasher will warp/discolor ice bucket and render it useless.

Condenser Cleaning

Interval - Every Three Months

To maintain operational efficiency, keep the front grille free of dust and lint, and clean the condenser every three months. Depending on environmental conditions, more or less frequent cleaning may be necessary.

WARNING

Disconnect electric power to the unit before cleaning the condenser.

To remove and replace the grille for access to the condenser fins, follow this procedure:

1

ULIN_0238_A

Figure 8

1.Disconnect electrical power to the unit.

2.With a standard blade screwdriver or 1/4" nut driver, remove the grille screw (Figure 8, 1).

3.Remove the grille.

WARNING

DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged.

IMPORTANT

DO NOT use any type of cleaner on the condenser unit.

4.Clean the condenser coil using a soft brush with a “combing” action or vacuum cleaner. Do not touch the condenser coil.

5.Place the two hook-hinges (located on the rear bottom side of the grille) on the front lip of the unit base. Swing the grille up into position, aligning the grille and cabinet screw hole.

10

BI95, BI98, SP18

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use and Care Guide BI95 BI98 SP18Please Record Your Model Information Warranty RegistrationIntroduction Table of Contents This page intentionally left blank BI95, BI98, SP18 General Precautions Safety Alert DefinitionsSafety Precautions Initial Startup Product FeaturesOrigins Ice Maker Models BI95, BI98, SP18 OperationModel SP18 Ice Harvest ControlIce Maker Models 95Outdoor, Marine and RV Usage Normal Operating SoundsStorage, Vacation, Moving Exterior Cleaning As Required General CleaningCleaning and Maintenance Interior Cleaning As RequiredDefrosting MaintenanceCondenser Cleaning Interval Every Three MonthsInlet Screen Interval Every Twelve Months Ice Maker MaintenanceModel SP18 Ice Cube Thickness Adjustment Interval As Required LevelingDoor Alignment Check and Adjustment Door ReversalInvert Replacement Parts Before Calling for ServiceIf Service is Required ServiceTroubleshooting Guide Troubleshooting What to check when problems occurThis page intentionally left blank BI95, BI98, SP18 This page intentionally left blank BI95, BI98, SP18 Line Corporation Limited Warranty For General Inquiries For Service and Parts Assistance
Related manuals
Manual 20 pages 22.86 Kb

BI95, BI98, SP18 specifications

U-Line has been a pioneer in the field of undercounter refrigeration, and its SP18, BI98, and BI95 models stand out for their exceptional performance, innovative technologies, and versatile designs, making them highly sought after by both homeowners and professionals alike.

The U-Line SP18 model is crafted for those seeking a compact yet powerful solution to enhance their kitchen or entertainment area. This unit is designed to hold up to 42 cans, with a storage capability that can handle various beverages. One of the standout features is its digital temperature control that enables precise adjustments ranging from 34°F to 65°F, ensuring that your beverages are served at optimal temperatures. The glass door is an aesthetically pleasing element that also offers UV protection, preventing the degradation of your drinks due to light exposure.

Transitioning to the BI98 model, this unit is designed for built-in applications, allowing for seamless integration into cabinetry. The BI98 boasts an impressive capacity of 98 cans, making it ideal for larger gatherings or for households that stock up on beverages. One of its key technologies is the dual-zone cooling system, which allows users to independently control the temperatures in two separate sections, catering to different types of beverages at their ideal serving temperatures. This flexibility is especially beneficial for parties or when hosting multiple guests.

The BI95 is another remarkable addition to U-Line's lineup, designed specifically for those who prioritize versatility and efficiency. This model offers a slightly smaller capacity than the BI98, capable of holding around 95 cans. However, it compensates with advanced features like energy-efficient IntelliCold technology. This ensures that the compressor runs only when needed, maintaining consistent temperatures while minimizing energy consumption. The BI95 also features a sleek stainless-steel finish and a reversible door, enhancing its adaptability to various kitchen layouts and styles.

All three models come equipped with LED lighting that beautifully illuminates the interior, allowing for easy visibility and selection of beverages. The quiet operation of these models ensures that they can be placed in any living space without disruptive noise. U-Line's commitment to quality and functionality is evident across the SP18, BI98, and BI95, making these models staples for modern kitchens and entertainment spaces. Their combination of aesthetics, innovative technologies, and thoughtful design provides an unparalleled experience in beverage preservation and accessibility.
Top Page Image Contents