U-Line BI95, SP18, BI98 manual Invert

Page 14

5.Remove screws on opposite side of cabinet (Figure 19). Note that there may be a nut behind one or both screws on either side.

ULIN_0123_A

Figure 20

6.Install hinge on opposite side, bottom of cabinet (Figure 20). Replace nut on back side where installed. Align hinge outer edge with cabinet before tightening screws.

1

ULIN_0109_A

Figure 21

7.Relocate plastic spacer/bushing (Figure 21) on bottom of door to opposite side, and place door on bottom hinge pin. Clean out bushing hole in door bottom with a screwdriver if necessary.

 

Hinge

 

Plastic

 

Plastic

Plug Hole

 

Plug Hole

 

Screw

 

Right Side

 

Left Side

Door Swing

 

Door Swing

Right Side

Invert

Invert

Hinge

Screw

Hinge

 

 

ULIN_0142_A

Figure 22

8.Remove plastic hole plug (Figure 22) from door handle and relocate on opposite side.

9.Remove pivot screw from top hinge, invert screw and reinstall pivot screw in top hinge.

ULIN_0144_A

Figure 23

10.Remove three plastic screw plugs (Figure 23) from hinge holes, top of cabinet, opposite side. Be careful not to scratch cabinet.

11.Place door on lower hinge pin. Invert and install upper hinge on door.

ULIN_0145_A

Figure 24

12.Fasten upper hinge to unit (three screws) (Figure 24). Partially tighten screws.

13.Adjust door to assure proper seal. Tighten upper and lower hinge screws securely.

14.Replace three plastic plugs removed in Step 10 into holes on top of unit. Replace screws in holes in bottom of unit on opposite side.

15.Replace the grille.

14

BI95, BI98, SP18

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Use and Care Guide BI95 BI98 SP18Introduction Warranty RegistrationPlease Record Your Model Information Table of Contents This page intentionally left blank BI95, BI98, SP18 Safety Precautions Safety Alert DefinitionsGeneral Precautions Initial Startup Product FeaturesOrigins Ice Maker Models BI95, BI98, SP18 OperationModel SP18 Ice Harvest ControlIce Maker Models 95Storage, Vacation, Moving Normal Operating SoundsOutdoor, Marine and RV Usage Exterior Cleaning As Required General CleaningCleaning and Maintenance Interior Cleaning As RequiredDefrosting MaintenanceCondenser Cleaning Interval Every Three MonthsModel SP18 Ice Maker MaintenanceInlet Screen Interval Every Twelve Months Ice Cube Thickness Adjustment Interval As Required LevelingDoor Alignment Check and Adjustment Door ReversalInvert Replacement Parts Before Calling for ServiceIf Service is Required ServiceTroubleshooting Guide Troubleshooting What to check when problems occurThis page intentionally left blank BI95, BI98, SP18 This page intentionally left blank BI95, BI98, SP18 Line Corporation Limited Warranty For General Inquiries For Service and Parts Assistance
Related manuals
Manual 20 pages 22.86 Kb

BI95, BI98, SP18 specifications

U-Line has been a pioneer in the field of undercounter refrigeration, and its SP18, BI98, and BI95 models stand out for their exceptional performance, innovative technologies, and versatile designs, making them highly sought after by both homeowners and professionals alike.

The U-Line SP18 model is crafted for those seeking a compact yet powerful solution to enhance their kitchen or entertainment area. This unit is designed to hold up to 42 cans, with a storage capability that can handle various beverages. One of the standout features is its digital temperature control that enables precise adjustments ranging from 34°F to 65°F, ensuring that your beverages are served at optimal temperatures. The glass door is an aesthetically pleasing element that also offers UV protection, preventing the degradation of your drinks due to light exposure.

Transitioning to the BI98 model, this unit is designed for built-in applications, allowing for seamless integration into cabinetry. The BI98 boasts an impressive capacity of 98 cans, making it ideal for larger gatherings or for households that stock up on beverages. One of its key technologies is the dual-zone cooling system, which allows users to independently control the temperatures in two separate sections, catering to different types of beverages at their ideal serving temperatures. This flexibility is especially beneficial for parties or when hosting multiple guests.

The BI95 is another remarkable addition to U-Line's lineup, designed specifically for those who prioritize versatility and efficiency. This model offers a slightly smaller capacity than the BI98, capable of holding around 95 cans. However, it compensates with advanced features like energy-efficient IntelliCold technology. This ensures that the compressor runs only when needed, maintaining consistent temperatures while minimizing energy consumption. The BI95 also features a sleek stainless-steel finish and a reversible door, enhancing its adaptability to various kitchen layouts and styles.

All three models come equipped with LED lighting that beautifully illuminates the interior, allowing for easy visibility and selection of beverages. The quiet operation of these models ensures that they can be placed in any living space without disruptive noise. U-Line's commitment to quality and functionality is evident across the SP18, BI98, and BI95, making these models staples for modern kitchens and entertainment spaces. Their combination of aesthetics, innovative technologies, and thoughtful design provides an unparalleled experience in beverage preservation and accessibility.
Top Page Image Contents