U-Line B195, B198, ADA151M, B12115, WH95, SS-98 manual Cut-Out Dimensions, Prepare Site

4 Prepare Site

Your U-Line product has been designed for either free-standing or built-in installation. When built-in, your unit does not require additional air space for top, sides or rear. However, the front grille must NOT be obstructed and clearance is required for an electrical and water connection in the rear.

IMPORTANT

Units can NOT be installed behind a closed cabinet door.

Cut-Out Dimensions

ADA15IM Models

BI-98 / SS-98 Models

Filler Panel (Not Provided by U-Line) – May Be Added Above or Below Unit to Enclose for a Built-In Look

Typical	21-1/2"
Counter
Height	Minimum
34-1/4"	See Electrical
to	Specifications
35-1/8"	for Power Supply
Cut-Out
Height
27-3/8"
	8"
	15-3/16"

See Electrical Specifications for Power Supply

BI-2115 Models

32"

to

33"

8"

15-1/4"

BI-95(B)(WH) Models

23-3/4”

Minimum

34-1/8"

to

35-1/8"

See Electrical

Specifications

for Power Supply 23-7/8"Minimum

Filler Panel (Not Provided by U-Line) – May Be Added Above or Below Unit to Enclose for a Built-In Look

8"

15-1/4"

SP-18 Models

Filler Panel (Not Provided by U-Line) –

Needed to Attach Mounting Flange on Unit

Typical
Counter
Height	18-1/2" Minimum
34-1/4"	See Electrical
to
35-1/8"	Specifications
	for Power Supply
Cut-Out
Height
25-1/16"
	8"
	14-3/16"

	3/4"
	Minimum Flange
	Mounting Area
	26" Minimum
Cut-Out	See Electrical
	Specifications
Height
	for Power Supply
18-7/8"
3/4"	14-1/4"
Minimum Flange	Cut-Out Width
Mounting Area

8" Height

From Floor

3/4” Toe Kick

Minimum Flange

Mounting Area

Prepare Site 4