Using the Citrus Juicer

•Assemble the appliance with the citrus juicer components.

•Make sure the appliance is switched oﬀ and unplugged.

•Be sure the securing clamps are safely locked before plugging in the unit.

•Clean and wash the citrus fruit to be used.

•Plug the appliance into the electrical outlet.

•Slice the fruit into halves.

•By simply placing the citrus fruit half onto the cone and pressing slightly,the appliance will begin to operate and extract juice into the collecting container.

•Use either the larger or smaller cone, depending on the size of the fruit to be juiced. The larger cone is suitable for grapefruit and large oranges. The smaller cone is best suited for small oranges, lemons and limes.

•Open the non-drip valve in order for the juice to ﬂow to the collecting cup.

CLEANING AND MAINTENANCE

After each use and before cleaning, unplug the appliance from outlet and allow the unit to stop. DO NOT ATTEMPT TO CLEAN WHILE THE MOTOR IS

RUNNING OR THE COMPONENTS ARE STILL MOVING.

•CAUTION: NEVER IMMERSE THE BASE UNIT,CORD OR PLUG IN WATER

•Open the securing clamps by pushing the release button.

•Remove plunger, cover,pulp container and grater/ﬁlter basket and clean under clear running water. A mild dish detergent may be used as well. If using deter- gent, be sure to rinse and dry thoroughly.

•If you have problems removing small particles from the grater/ﬁlter basket, a small soft brush will removeremaining particles, (i.e.toothbrush,vegetable brush, dish brush).

•Dry all parts thoroughly.

•To facilitate easier cleaning,rinse the ﬁlter immediately after use.

•NEVERWASH THE BASE MOTOR UNIT.Toclean the base,wipe clean with a damp sponge and dry immediately. Neveruse excess water,treated cloths, harsh cleaning agents, or sprays.

•Reassemble all parts and store in a dry place.