Taylor AJ-1450-BL Using Your Juice Extractor ?BEFORE First USE·, How to use your Juice Extractor

Page 5

USING YOUR JUICE EXTRACTOR

?BEFORE FIRST USE·

Make sure the voltage in your outlet is the same as the voltage indicated on the appliance. This appliance is for 120–Volt AC electrical outlet only.

?Remove any bags, labels or stickers from the appliance. ?Clean the unit with a damp soft cloth

?Wash all of the removable parts – container cover, plunger, feeding funnel, grater/filter basket - using a sponge, warm water and mild dish detergent. Rinse and dry carefully.

?Practice assembling and disassembling the unit before operating.

NOTE: do not immerse the base unit in water when cleaning.

How to use your Juice Extractor

?Place the unit on a flat, sturdy surface with adequate clearance (i.e., do not place under wall cabinets or on carpeting or other soft surfaces). This appliance is not for use in convection or conventional ovens, microwaves, or on a stovetop.

?Always be sure that the appliance is properly assembled, turned on and running before inserting food. ?Do not force feed the juicer. For most fruits and vegetables, a slow start/stop or jabbing motion will work best.

If the juicer starts to vibrate, a slightly stronger push with the firmer item should bring it into balance. ?Firmer items are best used when the pieces are just large enough to fit in the chute. Softer items are best used

when cut into smaller pieces. Items with thin skins (tomatoes/grapes) are best when chopped into even smaller pieces. Stringy items like celery should be cut into roughly 2” long pieces for best performance.

?When making a drink that combines more than one fruit or vegetable, it is recommended to alternate the various fruit or vegetable pieces when placing them in the unit. For Example: Carrot/Celery/Tomato Juice – place a couple pieces of one vegetable into the juicer, then a couple of pieces of the second vegetable, then the third vegetable. Repeat rotation until all pieces have been placed in the juicer. This will provide better juicing results than juicing all carrots, then all celery and then all tomatoes.

?When juicing leafy greens, it is recommended that you twist and roll the greens into a ball the size of a golf ball. Always place the greens into the juicer first, followed by firmer produce like carrots or celery. The juice from these firmer vegetables will force additional juice from the greens.

?When juicing soft produce like tomatoes or grapes, it is best to juice slowly, pausing until the flow of juice has slowed down. The fiber of softer produce can clog the holes in the juice basket, so you may have to empty the basket more frequently. It is helpful to alternate with firmer produce.

?When finished juicing, allow the appliance to run for a minute to allow all juice to be extracted from the pulp. ?It is important that you select fresh, firm and crisp produce for best juicing results.

?Whenever possible, drink the juice at once. The sooner the juice is consumed, the greater the benefit from vitamins and nutrients.

If storing the juice, use a glass container and add a few drops of lemon juice to better preserve the juice. KEEP STORED JUICE REFRIGERATED.

Getting Started·

?Make sure the appliance is switched off and unplugged.

?Place the separating unit (5) on the motor unit (8), push with both hands on the separating unit until it clicks in place.

?Insert the grater/filter unit (4), turning clockwise until it sits securely. ?Mount the protective cover (3) and fasten the safety locks (10).

?Place the pulp container (9) under the pulp residue spout (7), and set the juice cup (12) under the juice spout (6). ?Clean and wash the fruit or vegetables to be used.

?Cut into appropriate sized pieces for feeding into the feeding funnel. Stones and pips should be removed from fruit.

?Plug the appliance into the power outlet – remove the plug from its storage area to the required length. Remember, the unit will not operate if the safety locks are not properly engaged.

?Start the juice extractor by pushing the power button.

?Insert the prepared fruit and vegetables into the feeding funnel and gently push down with the food plunger.

NEVER USE YOUR FINGERS TO FEED FOOD DOWN INTO THE FUNNEL. ?FOOD MUST BE FED INTO THE APPLIANCE WHILE THE MOTOR IS IN OPERATION.

?Empty the pulp container and the juice container when full (this will probably occur at the same time) before continuing to process more food. Be sure to switch to the OFF position and wait until the motor stops before attempting to open the unit and empty the containers.

?You can make juice from different fruit and vegetables without having to clean your juice extractor, as flavors are not transferred.

5

Image 5
Contents Fruit & Vegetable Juice Extractor Table of Contents Important Safeguards Special Instructions Descriptive DiagramIntroduction This appliance is for Household USE onlyHow to use your Juice Extractor Using Your Juice Extractor ?BEFORE First USE·Warranty Information Cleaning and MaintainenceTroubleshooting

AJ-1450-BL specifications

The Taylor AJ-1450-BL is an elegantly designed acoustic guitar that embodies quality craftsmanship and innovation, making it a favorite among musicians of varying skill levels. This acoustic-electric model combines versatile performance with visual appeal, ensuring that it stands out both on stage and in the studio.

One of the standout features of the AJ-1450-BL is its solid Sitka spruce top. This wood is renowned for its ability to produce a rich, warm tone while maintaining excellent projection and clarity. The solid construction enhances the guitar's resonance, allowing for a full, dynamic sound that can fill a room effortlessly. Complementing the spruce top are layered mahogany back and sides, which contribute to the guitar’s overall tonal balance, adding depth to the sound while also improving durability.

In terms of design, the AJ-1450-BL showcases a stylish black finish, which not only enhances its aesthetic appeal but also serves to protect the wood from environmental damage. The guitar features a comfortable cutaway shape, which enables easier access to the upper frets, facilitating complex fingerwork and solos without compromise.

Equipped with a Fishman Presys II pickup system, the AJ-1450-BL ensures that players can easily amplify their sound. This system offers a natural, articulate tone when plugged into an amplifier, making it an excellent choice for performers. The built-in tuner and versatile tone controls allow musicians to adjust their sound on the fly, adding convenience during live performances.

Another noteworthy characteristic of the AJ-1450-BL is its playability. The neck is crafted from mahogany and features a comfortable profile that supports a variety of playing styles. The fingerboard is made from rosewood, providing a smooth playing surface that enhances speed and accuracy for both strumming and fingerpicking.

Overall, the Taylor AJ-1450-BL seamlessly integrates aesthetics with functionality, offering musicians a high-quality instrument that meets the demands of performance and practice. Whether you're strumming simple chords or delving into intricate melodies, this guitar is designed to elevate your musical experience, making it a worthy investment for any guitarist.