WhisperKool 2500 manual Cellar Side

Page 12

INSTALLATION cont.

CELLAR SIDE

STEP 4:

Slide the cooling unit in from the cellar side with the thermo- stat facing the outside of cellar. The outer flange should be flush to the wall. Secure the flange to the wall through the pre drilled holes. The screws should penetrate the studs and/ or frame as well as the upper and lower supports to provide adequate support for the WhisperKOOL system. Seal all cracks and gaps around the WhisperKool Slimline unit with an air- tight sealant or caulking to prevent air leakage.

Note: If you use decorative molding, it should be attached to the walls and never to the cooling unit.

STEP 5

Attach the condensate drain line

The condensation drain line tube is used to remove excess condensation from the unit to a proper discharge location. It is important that the drain line tube is properly connected and used to prevent leakage and other problems associated with excess condensation.

Failure to use the condensation drain line tube will void the warranty on the unit.

STEP 6

If removed, install the grille’s on both sides of the unit and plug in the power cord. The use of an extension cord is not recommended.

SET

55 WhisperKOOL

Page 12

SL 072710

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Coolest Thing In Wine Storage 07.27.10 Table of Contents Whisperkool Slimline Quick Reference Guide Introduction Customer Warranty Registration Review the Packing Slip to Verify ContentsCheck the Accessory Kits for the following contents Receiving & Inspecting the UnitPreparing the Wine Cellar Wall & Ceiling FramingMounting the Unit Door and Door Seal Inside CellarInstallation Electrical NeedsElectrical Outlet Installation Cellar Side Liquid Measuring Thermostat System To Use the thermostatSystem Operation Standard & Remote Control Panel Features and Operation Button Normal FunctionsCpsm Troubleshooting Alarm Codes ContMaintenance Schedule Unit does not run/power up Possible Cause Solution Cellar Temperature is to Warm Possible Cause SolutionUnit leaks water Possible Cause Solution Unit runs but does not cool Possible Cause Solution Possible Cause SolutionCompressor short cycles Possible Cause Solution Humidity in cellar too low Possible Cause SolutionContact WhisperKOOL Customer Service Technical AssistanceInstallation Terms and Conditions WhisperKOOL Slimline Cooling SystemPage WhisperKOOL 1738 E. Alpine Ave Stockton, CA Page WhisperKOOL

2500 specifications

WhisperKool 2500 is a renowned cooling solution specifically designed for wine cellars and wine storage. Its advanced features and innovative technologies make it a top choice for wine enthusiasts and collectors who value optimal storage conditions. This cooling unit is engineered to maintain consistent temperatures while minimizing noise and energy consumption, making it an excellent addition to any wine preservation environment.

One of the standout features of the WhisperKool 2500 is its ability to deliver a temperature range suitable for wine storage, typically between 50°F and 65°F. This range is critical for preserving the quality and flavor of wine, ensuring that it ages gracefully. The unit utilizes a powerful compressor system that allows for rapid cooling without compromising energy efficiency.

Another significant technology incorporated into the WhisperKool 2500 is its advanced air circulation system. It employs a high-velocity fan that promotes even temperature distribution throughout the wine cellar. This feature not only prevents hot spots but also ensures that all bottles are stored under consistent conditions. Additionally, the built-in dehumidification system helps reduce humidity levels, which is essential to prevent cork damage and mold growth.

The WhisperKool 2500 also includes a digital control panel, allowing users to monitor and adjust the temperature and humidity levels with ease. This user-friendly interface is equipped with an LCD display that provides real-time feedback, making it simple to maintain ideal storage conditions. Furthermore, the unit offers a range of customizable options, including the ability to set specific temperature and humidity thresholds.

Installation of the WhisperKool 2500 is straightforward, with a compact design that fits seamlessly into wine cellars of various sizes. Its self-contained cooling system means that it can be installed in both through-the-wall and ducted configurations, providing flexibility for different wine storage setups. Quiet operation is another hallmark of this unit, producing minimal noise to ensure an undisturbed environment for both wines and homeowners.

In summary, the WhisperKool 2500 combines advanced cooling technologies with user-friendly features to provide an exceptional wine storage solution. With its ability to maintain precise temperature and humidity levels, efficient operation, and ease of installation, it stands out as a reliable choice for anyone serious about their wine collection. Whether you are a casual collector or a seasoned connoisseur, the WhisperKool 2500 is designed to safeguard and enhance the quality of your wines.
Top Page Image Contents