WhisperKool 2500 manual Troubleshooting Alarm Codes, Cont

Page 17

Button

Normal Functions

cont.

 

 

CPSM

• Fof - Humidity Management Enhancement: This parameter is normally set at 1. This pa-

Mode

rameter should not be adjusted, as it simply provides an OFF cycle time for the fan, during

(Cont.)

the compressor OFF cycle. However, the parameter is located within the CPSM as a conve-

 

nience to the customer, should it need to be adjusted.

 

 

• CCS – Cellar Pre-Chill Set Point: This parameter is set at 52°f, but can be adjusted to a set

 

point between 45°f - 67°f.

 

 

• bLL/Act – Compressor Off or On for Low (bLL) or High (Act) Temperature Alarm: These pa-

 

rameters are set at “n”. With this parameter set at “n” the refrigeration system will continue

 

to operate normally, if there is a High or Low temperature Alarm. To change this parameter,

 

change the setting to “y”, and the compressor/refrigeration system will shut off

during a

 

High or Low temperature Alarm.

 

 

• Con/Cof – Compressor On time (Con) and Off time (Cof) with a Probe 1 failure/Alarm. These

 

parameters are set at Con 40 min/Cof 10 min. In the event that there is a Probe 1 failure/

 

Alarm, the compressor/refrigeration system automatically starts a predetermined ON/OFF

 

cycle, which is controlled by the Con and the Cof parameters. The customer can adjust

 

these parameters to maintain the desired Bottle Probe temperature. During a Probe 1

 

failure/Alarm, the Bottle Probe temperature can be monitored by pressing the Up or Down

 

arrow to view the High and Low Temperature History.

 

 

• Hes – Differential for Energy Reduction – This parameter is set at 4, which results in a set

 

point of 58°f during the Energy Reduction mode. A decrease in this setting will decrease

 

the set point, and an increase in this feature will increase the set point.

 

 

 

AUX

“AUX” indicates the unit is in its anti-frost mode. This means the evaporator temp has reached

 

a low temp of 26° and has sustained that temp for a period of five minutes. ( The compres-

 

sor and condenser fans will turn off, but the evaporator fans will continue to run. Once the

 

temperature of the evaporator gets back up to 40°, the “AUX” light will deactivate and the

 

system will revert back to normal operating conditions.)

 

 

 

 

TROUBLESHOOTING ALARM CODES

Alarm Codes

Cause

Solution

“P1”

Bottle probe failure

Replace Bottle Probe

“P1”

Bottle probe Disconnected

Reconnect Bottle Probe

“P2”

Evaporator Probe Failure

Replace Evaporator Probe

“HA”

Max Bottle Probe Temp Alarm

Check the set point, lower if needed

 

 

Check the door for a good seal

 

 

Check for sufficient insulation, re-insulate if needed

“LA”

Minimum Bottle Probe Temp

Check the set point, raise if needed

 

Alarm

 

“EA”

External Alarm

Check the display to see which alarm code is causing the alarm.

 

 

Then located the solution and repair.

“POF”

Keypad locked

Hold “Up” and “Down” buttons for 3 to 5 seconds to disable,

 

 

“PON” should appear once key pad is unlocked

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Coolest Thing In Wine Storage 07.27.10 Table of Contents Whisperkool Slimline Quick Reference Guide Introduction Review the Packing Slip to Verify Contents Customer Warranty RegistrationCheck the Accessory Kits for the following contents Receiving & Inspecting the UnitWall & Ceiling Framing Preparing the Wine CellarMounting the Unit Inside Cellar Door and Door SealElectrical Outlet InstallationElectrical Needs Installation Cellar Side To Use the thermostat Liquid Measuring Thermostat SystemSystem Operation Standard & Remote Button Normal Functions Control Panel Features and OperationCpsm Cont Troubleshooting Alarm CodesMaintenance Schedule Unit leaks water Possible Cause Solution Unit does not run/power up Possible Cause SolutionCellar Temperature is to Warm Possible Cause Solution Possible Cause Solution Unit runs but does not cool Possible Cause SolutionCompressor short cycles Possible Cause Solution Humidity in cellar too low Possible Cause SolutionTechnical Assistance Contact WhisperKOOL Customer ServiceWhisperKOOL Slimline Cooling System Installation Terms and ConditionsPage WhisperKOOL 1738 E. Alpine Ave Stockton, CA Page WhisperKOOL

2500 specifications

WhisperKool 2500 is a renowned cooling solution specifically designed for wine cellars and wine storage. Its advanced features and innovative technologies make it a top choice for wine enthusiasts and collectors who value optimal storage conditions. This cooling unit is engineered to maintain consistent temperatures while minimizing noise and energy consumption, making it an excellent addition to any wine preservation environment.

One of the standout features of the WhisperKool 2500 is its ability to deliver a temperature range suitable for wine storage, typically between 50°F and 65°F. This range is critical for preserving the quality and flavor of wine, ensuring that it ages gracefully. The unit utilizes a powerful compressor system that allows for rapid cooling without compromising energy efficiency.

Another significant technology incorporated into the WhisperKool 2500 is its advanced air circulation system. It employs a high-velocity fan that promotes even temperature distribution throughout the wine cellar. This feature not only prevents hot spots but also ensures that all bottles are stored under consistent conditions. Additionally, the built-in dehumidification system helps reduce humidity levels, which is essential to prevent cork damage and mold growth.

The WhisperKool 2500 also includes a digital control panel, allowing users to monitor and adjust the temperature and humidity levels with ease. This user-friendly interface is equipped with an LCD display that provides real-time feedback, making it simple to maintain ideal storage conditions. Furthermore, the unit offers a range of customizable options, including the ability to set specific temperature and humidity thresholds.

Installation of the WhisperKool 2500 is straightforward, with a compact design that fits seamlessly into wine cellars of various sizes. Its self-contained cooling system means that it can be installed in both through-the-wall and ducted configurations, providing flexibility for different wine storage setups. Quiet operation is another hallmark of this unit, producing minimal noise to ensure an undisturbed environment for both wines and homeowners.

In summary, the WhisperKool 2500 combines advanced cooling technologies with user-friendly features to provide an exceptional wine storage solution. With its ability to maintain precise temperature and humidity levels, efficient operation, and ease of installation, it stands out as a reliable choice for anyone serious about their wine collection. Whether you are a casual collector or a seasoned connoisseur, the WhisperKool 2500 is designed to safeguard and enhance the quality of your wines.
Top Page Image Contents