| Instructions for the Installer |
|
|
| |
The temperature conditions are listed in the table below: |
| |
|
|
|
Class | Ambient temperature |
|
SN (Subnormal) | from + 50° F to + 89° F |
|
N (Normal) | from + 61° F to + 89° F |
|
ST (Subtropical) | from + 64° F to + 100° F |
|
T (Tropical) | from + 64° F to + 109° F |
|
|
|
|
•The refrigerator must be placed at least 1 1/6” from electric or gas cookers and at least 11 5/6” from combustion or radiation heating systems.
•To allow proper cooling of the condenser, the refrigerator must not be positioned too close to the wall. To prevent this, the appliance comes complete with two plastic spacers which must be fitted to the top of the condenser (pic. 1). If the refrigerator is installed underneath a wall cupboard, its distance from it must be at least 2”.
pic. 1)
NOTE: Pay attention not to scratch or damage the floor when installing the appliance. If necessary, when positioning slide the refrigerator over pieces of wood or a mat to the point decided for connection to the electrical mains.
3.3 Positioning and levelling the appliance
Place the refrigerator on a stable and level floor. In case the floor is not perfectly level, use the two adjustable feet on the front part of the fridge (pic. 2). To ensure major stability, easier movement and a correct positioning of the product, two additional wheels (pic. 3) are present at the rear. In any case we recommend to move the regriferator very carefully in order to avoid floor damage (especially in case of wooden floor).
pic. 2) | pic. 3) |
8