Smeg SUK92CMX5 Installation of the Appliance, Electrical connection, Plate must not be removed

Page 15

Instructions for the installer

13.INSTALLATION OF THE APPLIANCE

It is the law that all gas appliances are installed by competent persons. Corgi gas installers are approved to work to safe and satisfactory standards. All gas installation, servicing and repair work must be in accordance with the gas safety regulations 1984 (installation and use) as amended 1990.

This appliance may be installed next to a wall which is higher than the appliance, as shown in the diagram showing the correct installation conditions. Any wall cupboards or shelves must be at a distance of at least 750 mm above the work surface.

13.1 Electrical connection

The I.D. plate with techinical data, registration number and brand name is visibily positioned in the storage compartment.

The plate must not be removed.

If the appliance is connected to the supply by means of a fixed connection, install a multipolar cut-out device on the line, with contact opening distance equal to or greater than 3 mm, located near the appliance and in an easily reachable position.

The connection terminals are located at the rear of the appliance. For electrical connections see following diagram. To access, remove the rear cover.

17

Image 15
Contents Contents Instruction for Safe and Proper USE Disposal Instructions OUR Environment PolicyPlate Must not be Removed Safety Precaution Intended USE of the ApplianceNever Attempt to Repair the Appliance Before First USE Know Your CookerDouble heating Front Control PanelCooking HOB Control Knob Standard heatingLower Heating Element this function is Main Oven Control KnobSmall Oven Thermostat Knob No Function SETCooking zone USE of the HOBUse of the electric grill in the large oven How to use the grillUSE of the Ovens Cooling systemStorage compartment Automatic cooking Clock adjustmentElectronic Programmer Semiautomatic cookingMinute Counter Adjusting alarm volumeSwitching off the alarm Cancellation of set dataCleaning the glazed ceramic hob Cleaning and MaintenanceCleaning stainless steel Ordinary daily cleaningDoor glass Cleaning of ovenOven door seal Extraordinary MaintenanceReplacement of light bulb Removing the doorInstallation of the Appliance Electrical connectionPlate must not be removed For operation on 220-240V use an H05RR-F /H05RN-F Wall fixingFor operation on 380-415V3N use an H05RR-F /H05RN-F For operation on 380-415V2N use an H05RR-F /H05RN-F