Smeg SCB66MPX5 manual Fitting the rear splash-back

Page 20

Instructions for the Installer

14.2 Fitting the rear splash-back

•Unscrew the nuts B.

•Place the splash-back on the hob, aligning the rods C with the holes D.

•Fix the splash-back to the hob by tightening the screws A.

14.3 Positioning and levelling the appliance (depending on model)

After making the electrical and gas connections, level the the appliance on the ground by means of its four adjustable feet. For good cooking results, the appliance must be properly levelled. Depending on the model you have purchased, the foot height adjustment range may vary from 70 to 95 mm and from 110 to 160 mm. These heights refer to the distance between the highest point of the foot (fixed part) and the lowest point (movable part which rests on the floor).

Image 20

Contents Table of Contents Precautions for USE Nameplate Must Never be RemovedRecycling Instructions OUR Environment Policy Never Attempt to Repair the Appliance Yourself Safety PrecautionsIntended USE Before Installation Getting to Know Your CookerThermostat Knob Description of Front Panel ControlsHOB Control Knobs Function Selector Knob Door Interlock Warning LightUsing the HOB Cooking zonesUsing the Oven Precautions and General AdviceUsing the electric grill Cooling fan systemFoods Runner Height Using the grillStorage compartment Accessories Available Setting the time Electronic ProgrammerSemiautomatic cooking Automatic cookingTimer Adjusting the buzzer volumeStopping the buzzer Deleting the data setCleaning and Maintenance Cleaning stainless steelRoutine daily cleaning Cleaning the ceramic hobCleaning the oven Cleaning the door glazingPyrolysis automatic oven cleaning Before starting the automatic cleaning cycleSetting the automatic cleaning cycle Extraordinary Maintenance Changing the light bulbRemoving the door Removing the gasketInstalling the Appliance Electrical connectionInstructions for the Installer Fitting the rear splash-back Positioning and levelling the appliance depending on model