Smeg STA6245, STA6246 instruction manual User instructions, Troubleshooting Minor Problems

Page 30
TROUBLESHOOTING MINOR PROBLEMS

User instructions

BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:

Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes.

Plug the power cord back into the socket.

Reconnect the water intake hose and open the tap again.

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the following instructions:

If the program fails to start, check that:

the dishwasher is connected to the electrical power supply;

there is no power failure;

the water tap is open;

the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

the drain hose is not kinked;

the drain siphon is not obstructed;

the dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

the correct amount of detergent has been added;

there is regenerating salt inside the special container;

the dishes are being loaded correctly;

the selected program is suitable for the dish types and their degree of soiling;

all the filters are clean and positioned correctly;

the spray arm nozzles are not obstructed;

there is no object obstructing the rotation of the spray arms.

29

Image 30
Contents Page Contents USES OTHER THAN THOSE DESCRIBED ABOVE Safety instructions1. Safety and operating instructions NEVER BE REMOVEDSafety instructions THIS DISHWASHER MUST BE USED BY ADULTSSafety instructions AQUASTOP MODELSAPPLIANCE Installation instructions 2. Installation and hook-up2.1 Water supply connection Installation instructions CONNECTING TO THE WATER SUPPLYDRAIN CONNECTION Installation instructions 2.2 Electrical connection and precautionsL = brown N = blue = yellow-green Installation instructions Fuse replacementFOR GREAT BRITAIN ONLY SELECTED PROGRAM INDICATOR LIGHTS User instructions3. Description of the controls 3.1 Upper panelDELAYED START BUTTON on some models only SETTING THE WASHING PROGRAM AND SWITCHING ONUser instructions DELAYED START LIGHTS on some models onlyUser instructions User instructions 3.2 Washing programsBefore starting a washing program make sure that CHANGING THE PROGRAM CANCELLING THE CURRENT PROGRAMUser instructions TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTUser instructions END OF CYCLEREMOVING THE DISHES 4. Operating instructions 4.1Using the water softening systemUser instructions ADJUSTING THE WATER SOFTENING SYSTEM User instructions4.2 Using the rinse aid and detergent dispensers User instructionsWATER HARDNESS TABLE ADJUSTING THE RINSE AID DISPENSER SETTING User instructionsADDING THE RINSE AID User instructions ADDING THE DETERGENTUser instructions 4.3 General warnings and recommendations3/1 Products User instructions Silverware silver items may stainLOWER BASKET 4.4 Using the basketsUser instructions LOADING THE LOWER BASKETinsert User instructionsCUTLERY BASKET insertUser instructions UPPER BASKETLOADING THE UPPER BASKET ADJUSTING THE UPPER BASKET User instructionsUser instructions CLEANING THE SPRAY ARMS 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER User instructionsPROLONGED DISUSE CLEANING THE FILTER UNITUser instructions Fill the rinse aid dispenserTROUBLESHOOTING MINOR PROBLEMS User instructionsIf the program fails to start, check that User instructions •there is rinse aid inside the special containerSafety level 6. TroubleshootingFAULT User instructionsE7 E8 E9 FAULTUser instructions DESCRIPTIONUser instructions TECHNICAL DATAWater supply pressure Electrical characteristics Width