Smeg STA6245, STA6246 Installation instructions, Electrical connection and precautions

Page 8

2.2 Electrical connection and precautions

Installation instructions

2.2 Electrical connection and precautions

CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR.

THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE AND MEET THE REGULATIONS IN FORCE.

THE PLUG MUST BE ACCESSIBLE AFTER INSTALLATION.

NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD.

IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE.

DO NOT USE ADAPTORS OR SHUNT CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING.

IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD:

IT IS NECESSARY TO INSTALL IN THE FIXED WIRING AN ALL-POLE DISCONNECTION DEVICE HAVING A GAP BETWEEN CONTACTS OF AT LEAST 3.5MM. AFTER INSTALLATION THE DISCONNECTION DEVICE HAS TO BE EASY TO REACH.

THE CONNECTION TO THE MAINS MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN IN ACCORDANCE TO THE SCHEME SHOWN BELOW AND THE REGULATIONS IN FORCE.

L = brown N = blue

= yellow-green

In the event of damage to the supply cord, have it replaced by the manufacturer or an Authorized Technical Service Centre in order to avoid any risk.

7

Image 8

Contents Page Contents Safety instructions 1. Safety and operating instructionsUSES OTHER THAN THOSE DESCRIBED ABOVE NEVER BE REMOVEDSafety instructions THIS DISHWASHER MUST BE USED BY ADULTSAPPLIANCE Safety instructionsAQUASTOP MODELS 2.1 Water supply connection Installation instructions2. Installation and hook-up DRAIN CONNECTION Installation instructionsCONNECTING TO THE WATER SUPPLY L = brown N = blue = yellow-green Installation instructions2.2 Electrical connection and precautions FOR GREAT BRITAIN ONLY Installation instructionsFuse replacement User instructions 3. Description of the controlsSELECTED PROGRAM INDICATOR LIGHTS 3.1 Upper panelSETTING THE WASHING PROGRAM AND SWITCHING ON User instructionsDELAYED START BUTTON on some models only DELAYED START LIGHTS on some models onlyUser instructions Before starting a washing program make sure that User instructions3.2 Washing programs CANCELLING THE CURRENT PROGRAM User instructionsCHANGING THE PROGRAM TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES User instructionsEND OF CYCLE User instructions 4. Operating instructions4.1Using the water softening system ADJUSTING THE WATER SOFTENING SYSTEM User instructionsWATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensersUser instructions ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGUser instructions User instructions ADDING THE DETERGENT3/1 Products User instructions4.3 General warnings and recommendations User instructions Silverware silver items may stain4.4 Using the baskets User instructionsLOWER BASKET LOADING THE LOWER BASKETUser instructions CUTLERY BASKETinsert insertLOADING THE UPPER BASKET User instructionsUPPER BASKET ADJUSTING THE UPPER BASKET User instructionsUser instructions 5. Cleaning and maintenance CLEANING THE WATER INTAKE FILTERCLEANING THE SPRAY ARMS User instructionsCLEANING THE FILTER UNIT User instructionsPROLONGED DISUSE Fill the rinse aid dispenserIf the program fails to start, check that TROUBLESHOOTING MINOR PROBLEMSUser instructions User instructions •there is rinse aid inside the special container6. Troubleshooting FAULTSafety level User instructionsFAULT User instructionsE7 E8 E9 DESCRIPTIONTECHNICAL DATA Water supply pressure Electrical characteristicsUser instructions Width