Instruction on mounting and use, Use, Filter version

Instruction on mounting and use

Consult the designs in the front pages referenced in the text by alphabet letters. Closely follow the instructions set out in

this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined.

Use

The hood is designed to be utilized either for suction version at external evacuation or filtering version at internal recirculation.

Ducting version

The hood is equipped with a top air outlet B for discharge of fumes to the outside (exhaust pipe and pipe fixing clamps not provided). Attention!

If the hood is supplied with carbon filter, then it must be removed.

Filter version

Should it not be possible to discharge cooking fumes and vapour to the outside, the hood can be used in the filter version, fitting an activated carbon filter and the deflector F on the support (bracket) G, fumes and vapours are recycled through the top grille H by means of an exhaust pipe connected to the top air outlet B and the connection ring mounted on the deflector F (exhaust pipe and pipe fixing clamps not provided).

Attention!

If the hood is not supplied with carbon filter, then it must be ordered and mounted.

The models with no suction motor only operate in ducting mode, and must be connected to an external suction device (not supplied).

Installation

The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the range hood must be not less than 60cm from electric cookers and 70cm from gas or mixed cookers.If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

Electrical connection

The electrical tension must correspond to the tension noted on the label placed inside the cooker hood. Connect the electrical plug, where provided, to the an easily accessible outlet in conformity with local standards in force. Where an electrical plug is not provided (for direct connection to electrical network) place a standards approved bipolar switch with an aperture distance of not less than 3mm (accessible) from the contacts.

Attention: substituting the supply cable must be carried out by the authorised technical assistance service.

Mounting

Expansion wall plugs are provided to secure the hood to most types of walls/ceilings. However, a qualified technician must verify suitability of the materials in accordance with the type of wall/ceiling. The wall/ceiling must be strong enough to take the

weight of the hood. Do not tile, grout or silicone this appliance to the wall. Surface mounting only.

Operation

Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after terminating cooking.

Model with button panel

b. c. O d. 1 e. 2 f. 3 a.

a. operating gauge. b. on/off light switch c. off aspiration switch

d. minimum power selection aspiration switch e. medium power selection aspiration switch f. maximum power selection aspiration switch

Functioning - 5-key electronic model

O			1	2 3			O	I
				F C
1	2	3	4	5	6	7	8	9

1.Motor OFF button

2.ON button and motor speed selection button 1 - 2 - 3 - 1 - 2 - . . . .

3.Speed 1 LED

4.Speed 2 LED and metal grease filter saturation LED (in this latter case, the LED will flash - See instructions on grease filter cleaning).

Once the grease filters have been cleaned, press button 1 for about 3 seconds until you hear the acoustic signal (beep): the LED 4 will now stop flashing.

5.Speed 3 LED and active carbon filter saturation LED (in this latter case, the LED will flash - See instructions on active carbon filter replacement).

Once you have replaced the charcoal filter, press button 1 for about 3 seconds until you hear the acoustic signal (beep). LED 5 will now stop flashing.

Warning!

The active carbon filter saturation LED is not activated. In order to activate the active carbon filter saturation indicator, press buttons 2 and 7 simultaneously for 3 seconds. Initially, only LED 4 will flash, then after the 3 seconds have passed, LED 5 will also start flashing,

KSEV90X specifications

The Smeg KSEV90X is a versatile and stylish kitchen appliance designed to elevate your culinary experience. As part of Smeg's impressive lineup, this range cooker offers a perfect blend of modern technology, elegant design, and exceptional performance. Its standout features make it a popular choice for both amateur home cooks and professional chefs.

One of the primary characteristics of the Smeg KSEV90X is its spacious cooking capacity. The cooker boasts a large oven cavity, ideal for preparing multiple dishes simultaneously. The generous size allows for more efficient meal preparation, making it perfect for family gatherings or dinner parties.

The KSEV90X features a dual fuel system that combines the benefits of gas cooking with electric oven performance. This hybrid configuration allows for precise temperature control while offering the convenience of gas burners on the cooktop. The five gas burners are thoughtfully distributed, providing ample space for various pots and pans, and include a powerful wok burner for high-heat cooking.

In addition to its cooking capabilities, the Smeg KSEV90X is equipped with advanced technologies that enhance the cooking process. Its state-of-the-art multifunction oven provides a wide range of cooking functions, including conventional cooking, fan-assisted cooking, and grill settings. These options give users the versatility needed to experiment with different cooking styles and techniques.

Another key feature is Smeg's commitment to energy efficiency. The KSEV90X is designed to minimize energy consumption while delivering exceptional cooking results. The appliance is rated highly for energy efficiency, which not only benefits the environment but also lowers utility costs.

For ease of use, the Smeg KSEV90X includes intuitive controls and an easy-to-read digital display. This user-friendly interface simplifies the cooking process, allowing users to adjust settings with precision. Additionally, the appliance features a removable inner glass door, making cleaning accessible and hassle-free.

In terms of design, the Smeg KSEV90X is a stunning addition to any kitchen. Its sleek stainless steel finish and retro aesthetics are synonymous with the Smeg brand, bringing a touch of vintage charm to contemporary spaces. The combination of functionality and style ensures that the KSEV90X not only performs exceptionally but also adds a designer element to your kitchen decor.

In conclusion, the Smeg KSEV90X is a top-of-the-line range cooker that excels in performance, efficiency, and aesthetics. With its spacious oven, dual fuel cooking option, advanced technologies, and eye-catching design, it is a valuable asset for anyone passionate about cooking. Whether you are baking, roasting, or simmering, the KSEV90X stands ready to help you create delicious meals with ease.