Smeg
PGA95FSC3, PGA95F3, PGA95SC3
manual
Gas Connection, Instructions for the installer
Install
Problems And Causes
Cleaning And Maintenance
Page 10
Page 9
Page 11
Image 10
Page 9
Page 11
Contents
Contents
NEVER UNPLUG BY PULLING ON THE CABLE
Instructions for the installer
1. INSTRUCTIONS FOR SAFE AND PROPER USE
NEVER ATTEMPT TO REPAIR THE APPLIANCE
Instructions for the installer
2. INSTALLATION OF THE APPLIANCE
Apply a layer of “waterproof primer” to the milled surface
Refer to installation instruction
2.3Clearance above and around domestic appliances
REQUIREMENTS
2.4Room ventilation
2.5 Discharge of combustion products
3. GAS CONNECTION
3.1Electrical connection
4. ADAPTATION TO DIFFERENT TYPES OF GAS
4.1Replacement of nozzles on the hob
BURNERS
4.2Burner and nozzle characteristics table
4.3Arrangement of burners on cooking hob
Burner
5.1Adjustment of minimum for natural gas
5. FINAL OPERATIONS
5.2Lubrication of gas taps
Instructions for the user
6.USE OF THE COOKING HOB
6.3 Diameter of containers
6.2 Practical advice for using the burners
Ø min. and max. cm
7.2 Cleaning of cooking hob components
7. CLEANING AND MAINTENANCE
7.1 Cleaning stainless steel
7.1.1 Ordinary Daily Cleaning
CAUSE
8. PROBLEMS AND CAUSES
PROBLEM
WHAT TO DO
Page
914772758/ C
Related pages
All Install page
About Installing and Removing for Sun Microsystems CP32x0
Installing Model 403 Duct Connector for Monessen Hearth MCUF42D SERIES
Installation DE Lapile for Kodak T500
Installation for Samsung WD90N642OOW/EE
Installing controllers for Fujitsu RX600 S4
ROOF-VENTED Installation for Amana A CO15ZOA
Installation på en skrå væg for Samsung LH55UDEPLBB/EN
Installation for Marshall electronic V-R901DP-AFHD
Installation for Samsung DV90M50003W/EE
Installing plug-in for Vivotek PT71373GPP/ISMA
What does the U1
Fisher and Paykel fault code
indicate?
Top
Page
Image
Contents