Gas connection, Bottled gas connection

Instructions for the Installer

4.Gas connection

If the appliance is installed above an oven, the gas hose must be passed around the back of the oven to prevent overheating.

The connection to the gas mains may be made using a copper pipe or a continuous-wall steel hose in accordance with the relevant regulations. To simplify connection, the horizontal position of the fitting A on the back of the appliance is adjustable. Undo the hexagonal nut B, turn the fitting A into the required position and re-tighten the hexagonal nut B (it has a rubber gasket to ensure it provides an effective seal). When installation is complete, check for any leaks with a soapy solution, never with a naked light. The appliance is tested with G20 (2H) natural gas at the pressure of 20 mbar. For use with other types of gas, see point "5. ADAPTING TO DIFFERENT TYPES OF GAS". The gas intake connection has an external ½” gas thread (ISO 228-1).

Connection with copper pipe: The connection to the gas supply mains must be made so that no stresses or strains of any kind are applied to the appliance. The connection can be made using the adapter unit D with two conical elements, always fitting the gasket C supplied.

Connection with steel hose: use only continuous-wall stainless steel hoses compliant with the relevant regulations, and always fit the gasket C supplied between the fitting A and the hose E.

When connecting with a hose, ensure that the total length of the pipeline is not more than 2 metres; also ensure that the hoses do not touch moving parts and are not crushed.

4.1 Bottled gas connection

Use a pressure regulator and make the connection to the gas cylinder in accordance with the relevant regulations. Make sure that the gas supply pressure is as stated in the table in point "5.2 Adjusting for bottled gas".

4.2 Room ventilation

The appliance may only be installed in a permanently ventilated room as specified by the relevant regulations. The air flow into the room where the appliance is installed must be sufficient for proper gas combustion and room ventilation. The air intakes, protected by gratings, must be of suitable size (see relevant regulations) and located so that they cannot be even partially obstructed.

The kitchen must be kept properly ventilated to disperse the heat and humidity produced by cooking processes: in particular, a window should be opened or the speed of any fans increased after prolonged use.

4.3 Combustion gas discharge

Combustion gases must be discharged by means of hoods connected to a flue with reliable natural draught, or a fan extraction system. An effective extraction system requires careful design by an authorised specialist, and must comply with the regulation distances and positions. After installation, the engineer must issue a certificate of compliance.

PVA750D, PVA750, PVA750NL, PVA750BE specifications

Smeg is a renowned Italian brand known for its innovative kitchen appliances that combine style and functionality. Among its impressive lineup, the Smeg PVA750 series, which includes the PVA750BE, PVA750NL, PVA750, and PVA750D, stands out as an ideal choice for modern kitchens seeking elegance without compromising on efficiency.

One of the key features of the Smeg PVA750 series is its sleek and sophisticated design, characterized by smooth lines and a blend of high-quality materials, including stainless steel and glass. This aesthetic appeal makes these models not just appliances but also decorative elements that enhance kitchen décor.

In terms of performance, the PVA750 series is equipped with powerful suction capabilities, ensuring that even the most stubborn odors and smoke are efficiently eliminated. The units typically boast multi-speed settings, allowing users to adjust the suction power based on their cooking needs—from simmering sauces to frying meats. This flexibility ensures that the air remains fresh and clean during all culinary activities.

The PVA750 series incorporates advanced technologies that enhance their usability and maintenance. For instance, many models feature a touch control panel for easy operation, allowing users to choose settings with a simple swipe or tap. Additionally, some models include filters that are readily removable and washable, promoting convenience and hygiene.

Energy efficiency is another highlight of the PVA750 series. Designed to reduce electricity consumption, these appliances help homeowners save on energy bills while remaining environmentally friendly. This commitment to sustainability is reflected in the thoughtful engineering of the units.

The noise level of the Smeg PVA750 series is remarkably low, making these appliances an attractive option for open-plan living spaces where quietness is paramount. Users can cook, entertain, and relax without interference from excessive noise.

The series also provides options for additional features such as LED lighting that brightens the cooking area without adding unnecessary heat, ensuring visibility while preparing meals.

In summary, the Smeg PVA750BE, PVA750NL, PVA750, and PVA750D models exemplify the perfect blend of aesthetics, technology, and functionality. With their powerful suction, easy-to-use controls, energy efficiency, and stylish design, these kitchen hoods are ideal for anyone looking to elevate their cooking experience while maintaining a chic kitchen atmosphere.