Smeg SE32X manual Cleaning, Hotplate

Page 5

CLEANING

IMPORTANT:

always disconnect the appliance from the electricity main before carrying out any cleaning operation.

3) HOTPLATE

If you want to preserve the surface clean and bright, periodically wash the hot plate with lukewarm soapy water.

Following this, all parts should be thoroughly rinsed and dried. Never wash them while they are still warm and never use abrasive powders.

Do not allow vinegar, coffee, milk, salted water, lemon or tomato juice from remaining in contact with the enamelled surfaces for long periods of time.

WARNINGS:

-correctly preserve the plate after use by treating it with special products, easily available on the market. This will keep the surface of the plate clean and bright. The operation will also prevent the formation of rust.

-Any liquid overflowed the pans, must be always remove with a rag.

-Don’t use steam jets for the equipment cleaning.

5

Image 5
Contents Tipo PFZ MOD. SE32X Description of the HOT Plates USE Switching on the Electric PlatesHOW to USE the Electric Plates USE Hotplate CleaningFixing the HOT Plate InstallationInstalling the HOT Plate Electrical Connections Type and Section of the Power Cables Power of Electrical Components Denominations WServicing Replacing the Electrical ComponentsTechnical Data Technical Assistance and Spare Parts