Smeg ST4108 manual Description of the controls, Upper panel, User instructions

Page 10

3. Description of the controls

User instructions

3. Description of the controls

3.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open.

1

ON/OFF BUTTON

Pressing this button energises the appliance.

SELECTED PROGRAM INDICATOR LIGHTS

2Illumination of this light denotes the program selected and the occurrence of a fault (troubleshooting).

PROGRAM SELECTION BUTTON

3By pressing this button in sequence it is possible to select the desired program.

4

5

6

7

8

SALT WARNING LIGHT

Illumination of this light signals that salt container is empty.

RINSE AID WARNING LIGHT

Illumination of this light signals that rinse aid dispenser is empty.

"3/1" OPTION BUTTON

Press this button to activate the option for use of 3/1 products.

"3/1" OPTION LIGHT

Illuminates to indicate that the function is activated.

PROGRAM DELAY BUTTON

Press this button to delay the start of the program by up to 9 hours.

9 INFORMATION DISPLAY

SETTING THE WASHING PROGRAM AND SWITCHING ON

To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.

9

Image 10

Contents Page Contents Safety instructions 1. Safety and operating instructionsSafety instructions THIS DISHWASHER MUST BE USED BY ADULTSSafety instructions AQUASTOP MODELS2. Installation and hook-up Installation instructions2.1 Water supply connection CONNECTING TO THE WATER SUPPLY Installation instructionsDRAIN CONNECTION Installation instructions 2.2 Electrical connection and precautionsL = brown N = blue = yellow-green Fuse replacement User instructionsFOR GREAT BRITAIN ONLY SETTING THE WASHING PROGRAM AND SWITCHING ON 3. Description of the controls3.1 Upper panel User instructionsUser instructions 0,02Before starting a washing program make sure that 3.2 Washing programsUser instructions 3/1 OPTION BUTTONCHANGING THE PROGRAM CANCELLING THE CURRENT PROGRAMUser instructions TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTEND OF CYCLE User instructionsREMOVING THE DISHES 4. Operating instructions 4.1Using the water softening systemUser instructions User instructions Do not use table salt as it contains insoluble substances which, over time, may damage the water softening systemUser instructions 4.2 Using the rinse aid and detergent dispensersWATER HARDNESS TABLE User instructions ADJUSTING THE RINSE AID DISPENSER SETTINGADDING THE RINSE AID User instructions ADDING THE DETERGENTUser instructions 4.3 General warnings and recommendations3/1 Products User instructions Silverware silver items may stainLOWER BASKET 4.4 Using the basketsUser instructions LOADING THE LOWER BASKETUPPER BASKET User instructionsCUTLERY BASKET VerticalUser instructions ADJUSTING THE UPPER BASKETLOADING THE UPPER BASKET CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenance5.1 General warnings and recommendations CLEANING THE SPRAY ARMSCLEANING THE FILTER UNIT CLEANING THE SPRAY ARM, TRAVELLING VERSIONUser instructions PROLONGED DISUSE TROUBLESHOOTING MINOR PROBLEMSUser instructions Fill the rinse aid dispenserUser instructions the correct amount of detergent has been addedE1 E2 E3 E4 E5 E6 6. TroubleshootingUser instructions E7 E8 E9 User instructionsUser instructions TECHNICAL DATAElectrical characteristics WidthHoogte H voor de modellen 820÷870 of 820÷890