Smeg ST4108 manual User instructions, Adding The Detergent

Page 19
ADDING THE DETERGENT

User instructions

ADDING THE DETERGENT

To open the detergent dispenser cap, lightly press the button P. Add the detergent and close the cap carefully.

During the washing cycle, the dispenser will be opened automatically.

When a program with hot prewash is selected (see program table), extra detergent must be placed in the cavity G/H (depending on models).

Use only detergents specially formulated for dishwashers. For optimal washing results it is important to use a good quality detergent.

The detergent packs must be sealed and stored in a dry place to prevent the formation of lumps which may negatively affect washing results. Once opened the detergent packs should not be kept for too long, otherwise the detergent loses its effectiveness.

Do not use detergents formulated for washing dishes by hand, because they produce a great deal of foam and may negatively affect the operation of the dishwasher.

Add the correct amount of detergent. An insufficient amount of detergent will result in a partial removal of dirt from the dishes, whereas an excessive amount is wasteful and does not improve the washing results.

The market offers liquid and powder detergents with differing chemical compositions, which may contain phosphates, or be phosphate-free but contain natural enzymes.

-Detergents containing phosphates are more effective against grease and starch at temperatures above 60°C.

-Enzyme detergents, on the other hand, are also effective at lower temperatures (from 40 to 55°C) and are more easily biodegradable. With enzyme detergents it is possible to obtain at low temperatures comparable results to those which can only be achieved at 65°C using traditional detergents.

For the safeguarding of the environment we recommend the use of phosphate- and chlorine free detergents.

18

Image 19
Contents Page Contents 1. Safety and operating instructions Safety instructionsTHIS DISHWASHER MUST BE USED BY ADULTS Safety instructionsAQUASTOP MODELS Safety instructions2. Installation and hook-up Installation instructions2.1 Water supply connection CONNECTING TO THE WATER SUPPLY Installation instructionsDRAIN CONNECTION Installation instructions 2.2 Electrical connection and precautionsL = brown N = blue = yellow-green Fuse replacement User instructionsFOR GREAT BRITAIN ONLY User instructions 3. Description of the controls3.1 Upper panel SETTING THE WASHING PROGRAM AND SWITCHING ON0,02 User instructions3/1 OPTION BUTTON 3.2 Washing programsUser instructions Before starting a washing program make sure thatTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT CANCELLING THE CURRENT PROGRAMUser instructions CHANGING THE PROGRAMEND OF CYCLE User instructionsREMOVING THE DISHES 4. Operating instructions 4.1Using the water softening systemUser instructions Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system User instructionsUser instructions 4.2 Using the rinse aid and detergent dispensersWATER HARDNESS TABLE User instructions ADJUSTING THE RINSE AID DISPENSER SETTINGADDING THE RINSE AID ADDING THE DETERGENT User instructionsUser instructions 4.3 General warnings and recommendations3/1 Products Silverware silver items may stain User instructionsLOADING THE LOWER BASKET 4.4 Using the basketsUser instructions LOWER BASKETVertical User instructionsCUTLERY BASKET UPPER BASKETUser instructions ADJUSTING THE UPPER BASKETLOADING THE UPPER BASKET CLEANING THE SPRAY ARMS 5. Cleaning and maintenance5.1 General warnings and recommendations CLEANING THE WATER INTAKE FILTERCLEANING THE FILTER UNIT CLEANING THE SPRAY ARM, TRAVELLING VERSIONUser instructions Fill the rinse aid dispenser TROUBLESHOOTING MINOR PROBLEMSUser instructions PROLONGED DISUSEthe correct amount of detergent has been added User instructionsE1 E2 E3 E4 E5 E6 6. TroubleshootingUser instructions User instructions E7 E8 E9Width TECHNICAL DATAElectrical characteristics User instructionsHoogte H voor de modellen 820÷870 of 820÷890