Smeg SE2641CX manual USE of the Cooking HOB, Hobs with knobs

Page 7

Instructions for the user

7.USE OF THE COOKING HOB

7.1Hobs with knobs

7.1.1Single cooking zones

Each knob shows the cooking zone it is for.

For example, the symbol

identifies the knob that

controls the rear right-hand cooking zone.

To heat, turn the knob to the desired position (1 to 6). Adjustment is continuous so that the appliance also operates at any intermediate value.

7.1.2 Dual cooking zones

Each knob shows the cooking zone it is for.

For example, the symbol identifies the knob that controls the rear right-hand cooking zone.

To heat the inner cooking zone, turn the knob to the desired position (1 to 6). To heat both the inner and outer cooking zones, turn the knob to and then release. The knob will thus return to 9. To adjust heating intensity, rotate the knob anticlockwise to the desired position. To return to heating of the inner cooking zone only, set the knob back to 0 and then turn to the desired position (1 to 6).

7.1.3 Description of symbols

REAR LEFT

REAR RIGHT

FRONT LEFT

FRONT RIGHT

7.1.4 Residual heat

The 4 warning lights located between the cooking zones come on when the temperature of one or more of the zones exceeds 60°C.

The lights go off upon temperature dropping to below approximately 60°C.

7.1.5 Switching off

To turn off, return the knob to 0.

23

Image 7
Contents Summary Manufacturer Declines ALL Responsibility for Improper USE Instructions for Proper USEPlate on the Casing Must not be Removed Never Unplug by Pulling on the Cable Safety InstructionsBefore First USE Know Your HOBCooking Zones Description of Control on the Front Control Panel Hobs with knobs USE of the Cooking HOBHeating zone Switching on the hobHobs with touch-control buttons Triple cooking zonesModifying the data set Timer on some models onlyOperator Error Switching off the cooking zonesActivating the holding function a Knob Number on Setting Display Type of FoodCooking tips Holding function aSomething WRONG? Cleaning and MaintenanceCleaning the ceramic hob Problem Possible Causes What to DO?Electrical connection InstallationTechnical information Rating plateType 2 Terminal Board Mounting Positioning of the HOB