Smeg SE2641CX manual Hobs with touch-control buttons, Switching on the hob, Triple cooking zones

Page 8

Instructions for the user

7.2 Hobs with touch-control buttons

When an icon is pressed the unit beeps to confirm.

To operate the panel of the hobs equipped with touch-controls, lightly press the icons printed on its surface.

On first connection to the electrical mains, an operating check will be carried out automatically and all the indicator lights will come on for a few seconds.

7.2.1 Switching on the hob

When not in use, all hob components will be switched off. Hold down for 2 seconds to switch the hob on; a led will turn on above the symbol to confirm that the hob is lit. If no functions are used within 30 seconds of switching the hob on, it will automatically turn itself off.

7.2.2 Single cooking zones

The associated cooking zone is indicated close to each control zone. For example, the symbol identifies the knob that controls the rear right-hand cooking zone.

After turning on the hob as described in paragraph “7.2.1 Turning on the Hob”, press the keys and

to activate the cooking zone (display indicating 0) and adjust the power at which it should operate. The power settings range from a minimum of 1 to a maximum of 9.

You must adjust the power within 5 seconds from when the cooking zone is activated, otherwise it will automatically deactivate.

Press the and buttons in the following way to activate the cooking zone and adjust its power:

1.press the symbol (0 appears on the display: this means that the cooking zone is activated);

2.by continuing to press the symbol , you can adjust the power of the cooking zone up to the maximum value of 9;

3.if you instead press the symbol , you adjust the power of the cooking zone down to the minimum value of 1.

7.2.3Dual cooking zones

To activate heating of the dual cooking zone, once power 9 is reached by following the instructions

provided in paragraph “7.2.2 Single cooking zones”, press the again. Now the maximum power of the cooking zone is activated, and is shown by the LED light turning on next to the number indicating

the operating power. Press on the symbols and to adjust the power of the dual cooking zone to the desired value.

7.2.4 Triple cooking zones

To activate heating of the triple cooking zone, once power 9 of the dual cooking zone is reached by following

the instructions provided in paragraph “7.2.3 Dual cooking zones”, press the again. Now the maximum power of the triple cooking zone is activated, and the LED indicating the operating power remains fix. Press

on the symbols and to adjust the power of the triple cooking zone to the desired value.

7.2.5 Heating zone

This zone, which is present only on some models in the range, keeps the area inside the dashed line at a temperature of approximately 90°C. It is used for warming dishes up or keeping them hot. If the hob is not locked, simply press the button to switch it on. Press the button to switch it off.

7.2.6 Cooking zone lock-out

The cooking zone lock-out function is a user safety functions. It locks out the hob controls to prevent the ceramic cooking zones being switched on accidentally.

Hold down for 1 second to lock out the hob. The hob can be reactivated by holding down again for 1 second.

7.2.7Cooking zone layout

REAR LEFT

REAR RIGHT

REAR

CENTRAL

CENTRAL

 

 

 

FRONT LEFT

FRONT RIGHT

FRONT

OVAL

CENTRAL

CENTRAL

 

 

 

 

 

 

24

Image 8
Contents Summary Plate on the Casing Must not be Removed Instructions for Proper USEManufacturer Declines ALL Responsibility for Improper USE Safety Instructions Never Unplug by Pulling on the CableKnow Your HOB Before First USECooking Zones Description of Control on the Front Control Panel USE of the Cooking HOB Hobs with knobsSwitching on the hob Hobs with touch-control buttonsTriple cooking zones Heating zoneTimer on some models only Operator ErrorSwitching off the cooking zones Modifying the data setKnob Number on Setting Display Type of Food Cooking tipsHolding function a Activating the holding function aCleaning and Maintenance Cleaning the ceramic hobProblem Possible Causes What to DO? Something WRONG?Installation Technical informationRating plate Electrical connectionType 2 Terminal Board Positioning of the HOB Mounting