Smeg A1CXU6 important safety instructions Important Safety Instructions

Page 2

Important Safety Instruction

1. IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS – Your Safety And the Safety of Others Are Very Important. We have provided many important safety messages throughout this manual and on your appliance. Read all instructions before using your appliance and always obey all safety messages.

RECOGNIZE SAFETY INFORMATION

This is a safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

UNDERSTAND SIGNAL WORDS

A signal word – DANGER, WARNING, or CAUTION – is used with the safety-alert symbol. DANGER identifies the most serious hazards. It means you can be killed or seriously injured if you do not immediately follow instructions. WARNING means you can be killed or seriously injured if you do not follow instructions. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

All safety messages will inform you as to potential hazards, inform you on how to reduce the risk of injury and as to what can occur if the instructions are not followed.

IMPORTANT: Installation and grounding must comply with applicable local codes. Observe all government local codes and ordinances.

- All ranges can tip

WARNING

- Injury to persons could result

- Install anti-tip device packed with the range

- See installation instructions

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN DEATH OR

SERIOUS BURNS TO CHILDREN OR ADULTS.

NOTE: This range is NOT designed for installation in manufactured (mobile) homes or for installation in Recreational Park Trailers.

DO NOT install this range outdoors.

For Massachussets Installations:

1Installations must be performed by a qulified or licensed contractor, plumber or gas fitter qualified or licensed by the state, province or region where this appliance is being installed.

2Shut-off valve must be “T” handle gas cock.

3Flexible gas connector must not be longer than 36”.

4

Image 2 Contents
Table of Contents Important Safety Instructions Save and Keep this Booklet Dimensional Requirements Product dimension UNPACKING, Moving and Placing the Range Instruction for wall fixing Tools needed for installation of Anti-Tip DeviceWall Fixing and ANTI-TIP Device Mounting the rear top upstand Electrical Connection This rating plate must never be removedUS installation only / 3-wire branch circuit Instructions for the Installer