![](/images/new-backgrounds/1080679/8067913x1.webp)
Instructions for the Installer
4. WALL FIXING AND ANTI-TIP DEVICE
- All ranges can tip
WARNING
- Injury to persons could result
- Install
- See installation instructions
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN DEATH OR
SERIOUS BURNS TO CHILDREN OR ADULTS.
| ELECTRIC SHOCK HAZARD | |
WARNING | - | Use extreme caution when drilling holes into the wall or floor. There may be |
|
| concealed electrical wires located behind the wall or under the floor. |
| - | Identify the electrical circuits that could be affected by the installation of the |
|
|
-Failure to follow these instructions may result in electrcal shock or other personal injury.
CAUTION: PROPERTY DAMAGE
-Contact a qualified installer or contractor to determine the proper method fro drilling holes through the wall or floor material (such as ceramic tile, hardwood, etc.)
-Failure to follow these instructions may result in damage to wall or floor coverings.
4.1 Tools needed for installation of Anti-Tip Device:
- Ruler or tape mesurer | - | Flat blade screwdriver | |
- | Philips screwdriver | - | Gloves |
- | Pliers | - | 3/8” Rachet |
- | Protection eyer glasses | - | Wrench |
4.2 Instruction for wall fixing
1Fix the screw to the wall and hook the chain (Fig. A);
2Hook the chain to the hole positioned at the rear of the cooker (Fig. B – Part. A);
3Once the chain is in position, push the cooker against the wall;
4The height of the screw hole from floor level must not exceed 315” - 800 mm (Fig. C).
9