Smeg A11A-6 manual Gas connection

Page 5

Instructions for the installer

2.2 Gas connection

This appliance is suitable for installation with Natural Gas or LPG (propane). Refer to page 12 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet. A test point (for checking the gas pressure) is supplied either with the regulator or as a separate fitting in the case of LPG (propane) appliances.

Connection of the appliance to the gas supply must be in accordance with the requirements of AS5601. A ½” BSP connector at the inlet is recommended and the gas supply line to the appliance must be of adequate length to allow sufficient withdrawal of appliance for service or disconnection and be:

1.annealed copper pipe or;

2.flexible hose according to AS/NZ1869 & be at least Class “B”, 10 mm

diameter.

The appliance must be installed with provision to allow the gas to be turned off and disconnected for servicing and removal of the appliance as required from the gas supply.

Before the appliance is operated make certain all relevant parts are placed in the correct position.

When the installation is completed the installation connections of appliance will require to be leak tested, the burner operating pressure and flame checked and adjusted.

Warranty service calls do not cover these adjustments!

To check the operating pressure of the appliance it is recommended at least 2 large size burners are used. Ensure appliance is secured to wall when installation is completed.

N.G. The regulator supplied must be fitted to the ½ BSP thread at the rear of the appliance. An approved manual shut-off valve must be installed. The N.G. regulator must be checked and adjusted to 1.0kPa after installation.

ULPG: Can be connected to the inlet fitting directly. The pressure must be checked to ensure it is operating at 2.75kPa. A separate test point fitting must be installed between the piping & the appliance for the pressure to be checked to ensure it is operating at 2.75kPa.

7

Image 5
Contents Contents Instructions for Safe and Proper USE IntroductionPlate Must not be Removed This rating plate must never be removed Installation of the ApplianceElectrical connection Gas connection Requirements Room ventilation Clearance above and around domestic cookersInstructions for the installer Instruction for wall fixing Adaptation to Different Types of GAS Replacement of nozzles on the hobArrangement of burners on cooking hob Burner and nozzle characteristics tableFinal Operations Adjustment of minimum for natural gasRegulation of minimum for LPG Positioning and levelling of the applianceMounting the rear top upstand Description of Controls Description of SymbolsFront control panel Thermostat KnobCooking HOB Burner Command Knob Function Switch KnobList of Functions Setting the timeElectronic Analogue Clock on some models only Minute-minder Programming Demo Function Lighting of the cooking hob burners USE of the Cooking HOBDiameter of containers Practical advice for using the cooking hob burnersOven Light USE of the OvenAvailable Accessories Cooking Hints Function Switch Thermostat Selector Switch from 50 to 250CTraditional cooking Hot-air cookingMake sure that the oven door is closed during cooking Function Switch Thermostat Switch AT MaximumGrill cooking Function Switch Thermostat Switch in Position Function Switch Thermostat Switch from 50 to 250CHot-air grilling DefrostingSpit cooking Function Switch Thermostat Switch from 50 to 200CCleaning of cooking hob components Cleaning and MaintenanceCleaning stainless steel Do not USE a Steam JET for Cleaning the Inside of the Oven Cleaning of the ovenBurner caps, flame cap crowns and burners Ignition plugs and thermocouplesUsing the self-cleaning liners Self-cleaning linersLooking after the self-cleaning liners Assembling the self-cleaning linersReplacement of light bulb Extraordinary MaintenanceOven door seal Removing the doorLubrication of gas taps By a specialised technician914773199/ B

A11A-6 specifications

The Smeg A11A-6 is a remarkable appliance that embodies the perfect fusion of style, performance, and advanced technology. Renowned for its distinctive retro design and vibrant colors, the A11A-6 stands out in any kitchen setting, captivating the attention of those who appreciate aesthetics in their culinary space.

One of the standout features of the Smeg A11A-6 is its multifunctional capabilities. This oven comes equipped with a variety of cooking modes, including conventional baking, fan-assisted convection, grilling, and even a pizza function, allowing users to explore diverse cooking techniques. With a spacious interior, the A11A-6 can accommodate multiple dishes simultaneously, making it ideal for family meals or hosting gatherings.

The oven boasts separate cooking zones, enabling users to prepare different dishes at varying temperatures. This feature enhances efficiency, allowing for a seamless cooking experience. Additionally, the oven utilizes an innovative vapor-cleaning function that simplifies maintenance, making it easy to remove grease and food residues by using steam, which is both effective and environmentally friendly.

Energy efficiency is another highlight of the Smeg A11A-6. With its A-class energy rating, users can enjoy powerful cooking performance without a heavy impact on their electricity bills. The oven is designed with thermal insulation that minimizes heat loss, ensuring optimal energy utilization and consistent cooking results.

Safety is paramount in the design of the Smeg A11A-6. It features a cooling fan that prevents the exterior from overheating and a safety lock function for the controls, providing peace of mind, especially in households with children.

For those who value connectivity, the Smeg A11A-6 may include smart technology, allowing users to control and monitor the oven remotely via a smartphone application. This level of convenience allows for preheating the oven or checking cooking progress from anywhere in the home, optimizing the cooking process.

In conclusion, the Smeg A11A-6 is not just an oven; it is a blend of cutting-edge technology, energy efficiency, and stylish design. With its multifunctionality, ease of maintenance, and emphasis on safety, it has become a sought-after appliance that enhances both culinary creativity and kitchen aesthetics. Whether for everyday cooking or special occasions, the Smeg A11A-6 promises to exceed expectations for home chefs of all skill levels.