Instructions for the user, Using the HOB

Instructions for the user

6 USING THE HOB

6.1Ignition of the burners

Before turning on the burners, make sure that the flame-spreader crowns and respective caps are properly fitted in their housings. Ensure the flame-spreader holes A are aligned with the ignition plugs and the thermocouples.

Panstand grid B, available upon request, is intended for use with woks (Chinese pans).

To prevent damage to the worktop, the hob is equipped with a raised grid C: installs over pans larger than the diameter shown in the table in paragraph " 5.3 Diameter of receptacles". Note that pans larger than 30 cm diameter must be used only on the central burner.

A symbol next to each knob indicates the relative burner. The device is fitted with electronic ignition. Simply press and turn the knob counter-clockwise to

the high flame symbol until the burner is ignited.

In models with safety valve, after ignition, the knob has to be held down for a few seconds to allow the thermocouple to heat up. The burner might go off when the knob is released: this means the thermocouple has not heated up sufficiently.

Wait a few moments and then repeat the operation, holding the knob down for longer. This operation is not necessary for burners without thermocouples.

Once the burner is ignited, adjust the flame as required.

Always check that the control knobs are in the position (off) when you finish g th hob.

If the burners turn off accidentally, a safety device will trip after about 20 seconds to cut off gas flow (even with the gas tap open).

PGA75SC3, PGA75FSC3, PGA75F3 specifications

The Smeg PGA75F3, PGA75FSC3, and PGA75SC3 are part of Smeg's extensive range of innovative cooking appliances, epitomizing the perfect blend of style, efficiency, and functionality. These built-in gas hobs showcase the brand's commitment to creating aesthetically pleasing yet highly practical kitchen solutions.

Starting with the Smeg PGA75F3, this model features a powerful four-burner layout, including a high-performance wok burner that delivers rapid heat for those who enjoy Asian cuisine or quick stir-fries. The burners are made of stainless steel, ensuring durability and longevity, while the enamelled cast iron pan supports provide superior stability for pots and pans of all sizes. The automatic electronic ignition feature enables quick and easy start-up with a simple twist of the control knob.

Moving on to the PGA75FSC3, this model takes the best aspects of the PGA75F3 and adds an enhanced stainless steel finish, adding a touch of sophistication to any kitchen. The unique design not only enhances the aesthetic appeal but also makes it easier to clean. The PGA75FSC3 also incorporates advanced safety features, including flame failure devices that automatically cut off the gas supply if the flame goes out, ensuring peace of mind during cooking.

The Smeg PGA75SC3 stands out with its sleek appearance and user-friendly controls. Like the PGA75F3 and PGA75FSC3, it hosts four burners but introduces an eco-friendly approach by using efficient burners that consume less gas without compromising performance. The durable construction and finish of the PGA75SC3 promise easy maintenance and long-term use.

All three models emphasize Smeg's dedication to energy efficiency, with burners designed to offer precise temperature control, allowing users to simmer, boil, or sauté with ease. The minimalist design ensures they fit seamlessly into modern kitchens while catering to diverse cooking needs.

In summary, the Smeg PGA75F3, PGA75FSC3, and PGA75SC3 bring together cutting-edge technology, safety features, and sleek aesthetics to create a new standard for gas cooking appliances. With a focus on usability and performance, Smeg continues to deliver exceptional products tailored for modern culinary experiences.